Author |
Topic: Ever seen a Sho-Bud Changer look like this? ** more pics |
Todd Brown
From: W. Columbia , South Carolina
|
Posted 1 Nov 2012 12:43 am
|
|
These are pics of an '82 Pro III that I recently got in the shop. Doing some work on it for a forum member. All the rods had to come out and I had to do a total re-rod after a very labor intensive cleaning! I can't figure why it wouldn't hold tune...with all the glue or gunk that someone(not the owner) put in the nylons It's some nice gooey stuff. You could twist all the nylons easily with bare fingers. A sure sign they're a little worn...just nasty looking Changers..
More pics to follow...
Last edited by Todd Brown on 4 Nov 2012 10:10 pm; edited 1 time in total |
|
|
|
Ray Anderson
From: Jenkins, Kentucky USA
|
Posted 1 Nov 2012 6:23 am
|
|
Hey Todd, Do you have those nylon tuning nuts for sale? I need a pack of these for my Pro111. |
|
|
|
Todd Brown
From: W. Columbia , South Carolina
|
Posted 1 Nov 2012 7:38 am
|
|
You can get them from Show Pro. They sell the George L's tuning nuts. Get their contact info from their website and get ahold of someone there. They'll get ya fixed up. |
|
|
|
Ken Pippus
From: Langford, BC, Canada
|
Posted 1 Nov 2012 7:40 am
|
|
I wonder if that stuff is "leftover" WD-40?
KP |
|
|
|
Todd Brown
From: W. Columbia , South Carolina
|
Posted 1 Nov 2012 11:01 pm
|
|
Same Changer without the dripping goo.
Some nice finished pics to follow... |
|
|
|
Ron Pruter
From: Arizona, USA
|
Posted 2 Nov 2012 7:07 pm
|
|
Nice job Todd. I had to stand on my head to look at the first two pictures. _________________ Emmons SKH Le Grande, '73 Fender P/J bass, Tick tack bass, Regal high strung, USA Nashville 112. |
|
|
|
Todd Brown
From: W. Columbia , South Carolina
|
Posted 4 Nov 2012 10:09 pm
|
|
Well, I finally got the time to post the rest of the pics. This guitar was a mess. All the pulls were way off. Raising strings that it should lower and vice versa. It wouldn't hold tune longer than 10 minutes. Really bad. When I got it, it had an A & B pedal that barely worked, and a Vertical that had the 10th string overtuned.
I took all the rods out. Gave the undercarriage a good cleaning. It was very filthy from years of over oiling. I replaced the 2nd string half stop barrel with a new one. The original one had seized up and wouldn't move. I re-rodded the guitar and gave it a complete 8x5 setup from scratch. Even the pedal stops had been messed with. I polished all the aluminum by hand the best I could and polished the lacquer finish.
This is the first Pro III I've played, and only the 2nd one I've seen in person. Having done some work on this guitar, my opinion of Pro III's has now changed dramatically. I was told to stay away from them because they were different as to how the changer mounts to the body compared to all the other wood neck 'Bud's. I was told the way these Pro III's Changers mounted was a big part of them not sounding as good as the other wood neck 'Bud's. Not true!!! I've had alot of Sho-Bud's come through my hands one way or another, buying them or working on them, and this one is tops on the list!
There was a lot of Super Glue on the aluminum necks that I was able to get off. I also re-outlined the Sho-Bud pedal bar pac-a-seat decal with a paint pen. I think she cleaned up nicely and so did the owner!!
Some pics...
Hope that's not too many pics... |
|
|
|
Alan Bidmade
From: Newcastle upon Tyne UK
|
Posted 5 Nov 2012 5:11 am
|
|
Not possible for there to be too many pics. Beautiful job. Looks a million $$! _________________ Ben-Rom #017 'Lorelei', Guild D25, Epiphone 'Joe Pass', Roland 40XL, Hilton VP
First name Alan, but known as Nick |
|
|
|
James Morehead
From: Prague, Oklahoma, USA - R.I.P.
|
Posted 5 Nov 2012 9:44 pm
|
|
Hey Todd, Sweet job, Bro!! _________________ "Good judgement comes from experience, and a lot of that comes from bad judgement"~old cowboy proverb.
shobud@windstream.net |
|
|
|
Todd Brown
From: W. Columbia , South Carolina
|
Posted 6 Nov 2012 10:06 pm
|
|
Thanks! |
|
|
|
Ken Byng
From: Southampton, England
|
Posted 10 Nov 2012 9:29 am
|
|
I agree about the negative comments about the Pro III Custom. I often wonder if people actually play the guitars that they bad mouth. The Pro III Buds are a great sounding and great playing guitar, and well worth consideration.
http://bb.steelguitarforum.com/viewtopic.php?t=209173&highlight= _________________ Show Pro D10 - amber (8+6), MSA D10 Legend XL Signature - redburst (9+6), Sho-Bud Pro 111 Custom (8+6), Emmons black Push-Pull D10 (8+5), Zum D10 (8x8), Hudson pedal resonator. Telonics TCA-500, Webb 614-E, |
|
|
|
Jr. Watts
From: Calico Rock Ar.
|
Posted 10 Nov 2012 8:41 pm
|
|
Super job Tod. Looks as good as a 32 Ford with a full race flathead dressed to the 9th. Can't get better than that. Jr. _________________ Sierra 12/10 gearless, Gibson Console Grand, Homemade dobro, Gretsch 5122, Peavey Session 400 limited, Peavey Classic VTX, Spectra 30-7. |
|
|
|