| Author |
Topic: What is the NAME of that conduit clamp stuff, fits on legs? |
David Mason
From:
Cambridge, MD, USA
|
Posted 30 Jun 2012 6:07 pm |
|
I've been searching under "conduit clamps", "conduit guides", everything I could think of. It's black plastic, fits on the steel legs but there's an offset channel to screw stuff to without the screw head scratching the leg. George L's sells a couple of inches for what I would guess is the price for a couple of feet of the stuff  :
http://ep.yimg.com/ca/I/yhst-12860235764893_2070_937360
I just need a long enough piece to festoon my legs with picks, bars, the reason I want a long piece so I can build a... thing, to hang a preamp on there. I'm just not asking for the right NAME...  |
|
|
 |
Jim Palenscar
From:
Oceanside, Calif, USA
|
Posted 1 Jul 2012 8:00 am
|
|
| I've successfully used PVC for that David- and you can use the little rubber feet that hardware stores sell to set the screws in so that they don't contact the legs. |
|
|
|
Dave Mudgett
From:
Central Pennsylvania and Gallatin, Tennessee
|
Posted 1 Jul 2012 9:59 am
|
|
PVC snap clamps - e.g., http://www.snapclamp.com/
These aren't exactly like your picture, but that's the general idea. |
|
|
|
Jerry Jones
From:
Franklin, Tenn.
|
Posted 1 Jul 2012 7:00 pm
|
|
David,
I made some clamps like those on my Goodrich Matchbox by using grey electrical PVC pipe and bonded steel/rubber sealing washers......all from Home Depot. I have seen that the clamps in your link lose their grip with age. |
|
|
|
Bill Terry
From:
Bastrop, TX
|
|
|
|
Don Blood
From:
Illinois, USA
|
|
|
|
Ken Metcalf
From:
San Antonio Texas USA
|
Posted 2 Jul 2012 4:48 am
|
|
George L sells them
_________________
MSA 12 String E9th/B6th Universal.
Little Walter PF-89.
Bunch of stomp boxes |
|
|
|
David Mason
From:
Cambridge, MD, USA
|
Posted 2 Jul 2012 2:13 pm
|
|
| Thanks that Richco V-1010 that Allied sells is exactly it, for $0.41 an inch... now I just have to figure out how to buy them! I have PVC, but the issue of the screws scratching the legs is solved by that Richco thing with the offset channel. I have a few leaded crystal bars that I don't want to "test" on hard floors. |
|
|
|
