| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Broken String On Goodrich Volume Pedal Question
Reply to topic
Author Topic:  Broken String On Goodrich Volume Pedal Question
Paul King

 

From:
Gainesville, Texas, USA
Post  Posted 7 Jun 2009 4:02 am    
Reply with quote

Saturday evening I sat down for a rehearsal we are playing for a wedding reception. Before the first song was over the string broke on my volume pedal. Naturally being a poor boy I did not have another one. I had to get through as best I could until a friend from that city could bring me one to use. It just messed with my mind playing straight through the amp. Is there a diagram anywhere that shows how the string goes back on? Bobbe Seymore has always preached carry two of everything which is a great idea. I will get a second pedal when I can get some things in order.
View user's profile Send private message Send e-mail
David Nugent

 

From:
Gum Spring, Va.
Post  Posted 7 Jun 2009 4:09 am     string
Reply with quote

Try Greg Cutshaw's site, I believe he has complete directions on replacing the string in your volume pedal. Someone suggested that a shoestring works well as a substitute for the original. (Note: be careful to closely follow the directions, if you wind the string incorrectly the pedal will function in reverse, on when in the up position, off when down.)
View user's profile Send private message
Jerry Overstreet


From:
Louisville Ky
Post  Posted 7 Jun 2009 6:42 am    
Reply with quote

http://www.scottysmusic.com/goodrichstring.htm
View user's profile Send private message Send e-mail
Jon Light


From:
Saugerties, NY
Post  Posted 7 Jun 2009 7:13 am    
Reply with quote

http://www.gregcutshaw.com/Goodrich%20120%20Pot/Goodrich%20120%20Pot.html
View user's profile Send private message Send e-mail Visit poster's website
Paul King

 

From:
Gainesville, Texas, USA
Post  Posted 7 Jun 2009 2:01 pm     pedal
Reply with quote

Thanks guys for the links. I will give it a whirl.
View user's profile Send private message Send e-mail
James Morehead


From:
Prague, Oklahoma, USA - R.I.P.
Post  Posted 7 Jun 2009 3:27 pm    
Reply with quote

Hey Mr. Paul, it was good bumping into you at the Dallas show. Long time since Sherman Texas, huh?? Cool

Yes snag a second backup pedal. That's something that will keep you keeping on, my friend!
View user's profile Send private message Send e-mail
Paul King

 

From:
Gainesville, Texas, USA
Post  Posted 7 Jun 2009 7:17 pm     pedal
Reply with quote

It was good to see too James at the Texas show. A second pedal is in order and I am having mine repaired tomorrow. It has been a few years since we ate over in Sherman,Texas. I guess the next treat is on me.
View user's profile Send private message Send e-mail
Paul King

 

From:
Gainesville, Texas, USA
Post  Posted 9 Jun 2009 4:21 pm     pedal
Reply with quote

I got my pedal repaired today. Does anyone know if a person can buy the string and the rubber feet? I looked for a link to Goodrich and did not find one. Do they have a website?
View user's profile Send private message Send e-mail
James Morehead


From:
Prague, Oklahoma, USA - R.I.P.
Post  Posted 9 Jun 2009 4:38 pm    
Reply with quote

Paul, email me your address and I'll send you some string and some rubber feet. Smile
View user's profile Send private message Send e-mail
Lee Baucum


From:
McAllen, Texas (Extreme South) The Final Frontier
Post  Posted 9 Jun 2009 5:19 pm    
Reply with quote

Is this Forum great, or what? Very Happy
View user's profile Send private message Send e-mail
Paul King

 

From:
Gainesville, Texas, USA
Post  Posted 10 Jun 2009 3:08 am     feet
Reply with quote

This is a great forum that has some great members. I met James and had lunch one time with him and his wife. I have visited with him at the Texas show. His offer for string and rubber feet just proves he is a first class individual. Thank you so much James and check your email.
View user's profile Send private message Send e-mail
Lynn Oliver


From:
Redmond, Washington USA * R.I.P.
Post  Posted 10 Jun 2009 10:20 am    
Reply with quote

I asked about rubber feet in another thread earlier this week. It turns out that Scotty's Music has them, but minimum shipping is over three times the cost of the feet.

Anyone have a cheaper source?
View user's profile Send private message Send e-mail Visit poster's website
James Morehead


From:
Prague, Oklahoma, USA - R.I.P.
Post  Posted 10 Jun 2009 10:25 am    
Reply with quote

I get replacement feet at the hardware store.
View user's profile Send private message Send e-mail
Terry Barnett

 

From:
Winnipeg Manitoba, Canada
Post  Posted 12 Jun 2009 8:35 pm    
Reply with quote

I've just recently come into possession of a Goodrich volume pedal. The pedal doesn't work. The light isn't burned out so I'm assuming it's the sensor that slides up and down on the inside the pedal itself...sorry, don't know the correct terminology. Does anyone on the forum have any suggestions? Maybe someone has a schematic they could share or knows where to begin testing...I'd love to be able to repair this thing and put it to good use. Cheers
View user's profile Send private message Send e-mail
Paul King

 

From:
Gainesville, Texas, USA
Post  Posted 15 Jun 2009 3:12 am     pedal
Reply with quote

I contacted Mike at Scottys Music in St. Louis. I read here that they carry the volume pedal parts. They had a daigram on how to string a Goodrich pedal as well. Mike confirmed they carry parts and I placed my order for myself and a couple of other steel players. I even ordered a DVD of Buddy Emmons from the Steel Guitar Classics. Thanks Mike for your courtesy and I look forward to receiving my order.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron