| Author |
Topic: Music Man Amp |
Charlie Thompson
From:
South Carolina, USA
|
Posted 5 Apr 2013 5:58 am |
|
I have a HD 130 212 that I used to play. I always thought it sounded pretty good with steel and could also double for as a guitar amp..I've been trying to sell it cause I can't hardly pick it up anymore. But I've been toying with the idea of putting the amp into a head only configuration.
I believe these have solid state pre-amp and a tube power amp? if so..
Is it possible to tap the power amp section with a modification?
Can anyone recommend a place to buy the cabinet and someone who could tap the power amp stage?
Thanks for any help. |
|
|
 |
Bill A. Moore
From:
Silver City, New Mexico, USA
|
Posted 5 Apr 2013 7:10 am
|
|
| The 2 TRS jacks on the front panel allow you to run an effects loop between the pre, and power amp. |
|
|
|
Dave Bertoncini
From:
Sun City West, Arizona USA
|
|
|
|
Charlie Thompson
From:
South Carolina, USA
|
Posted 5 Apr 2013 9:41 am TRS Jacks
|
|
| Bill A. Moore wrote: |
| The 2 TRS jacks on the front panel allow you to run an effects loop between the pre, and power amp. |
Bill, I don't have this on the front,unless you mean the two input channels... nothing like this on the back either. |
|
|
|
Bill A. Moore
From:
Silver City, New Mexico, USA
|
Posted 5 Apr 2013 11:34 am
|
|
| I guess I should know what I'm talking about before I post! I have an RD100, and that's the way it is configured, just assumed the 130 would be the same, but it's not. |
|
|
|
Rich Hlaves
From:
Wildomar, California, USA
|
Posted 5 Apr 2013 1:12 pm
|
|
Somebody may blast me for this but....I had an HD130 at one time. Yes, SS preamp. Most also had a 12A_7 as a phase inverter. There were a couple of different versions of this amp however.
I'd leave it alone and just cram it in the head cab.
_________________
On man....let the smoke out of another one. |
|
|
|
