| Author |
Topic: Peavey Session 500 settings ? |
Wade Branch
From:
Weatherford, Texas, USA
|
Posted 16 May 2005 5:52 am |
|
| I would like to know what are some different settings that you guys are using on your Peavey session 500 on the 6 active EQ knobs. |
|
|
 |
Erv Niehaus
From:
Litchfield, MN, USA
|
Posted 16 May 2005 6:23 am
|
|
Wade,
Do a search for Session 500 settings under electronics. That is where I got mine and they worked out really well. There are sooooo many knobs on the 500 that is is kind of mind boggling but it is worth it for the sound.
Erv |
|
|
|
Gene Jones
From:
Oklahoma City, OK USA, (deceased)
|
|
|
|
Jack Stoner
From:
Kansas City, MO
|
Posted 16 May 2005 11:42 am
|
|
I used a Session 500 for 15 years, both with a 71 Emmons PP, D-10 and then later with my Franklin D-10.
I set the EQ, basically the same as I did on my Nashville 400 (with factory mod) and with my Nashville 1000.
Low 3 O'clock (may be +9?), Mid at -2.5 and frequency on 800 Hz, Both the High and Presence about +.5. This may vary slightly depending on how new the strings were or the accoustics of the room, but they were my basic settings and most of the time that is where I played it at. |
|
|
|
George Kimery
From:
Limestone, TN, USA
|
Posted 16 May 2005 8:17 pm
|
|
These always worked for me. Jeff Newman had then in one of his news letters.
Pre +3.5
Low +11
paramid -6
Shift 800
Hi -3
Prescence +4
Post +5
rev +4 |
|
|
|
Wade Branch
From:
Weatherford, Texas, USA
|
Posted 17 May 2005 3:23 am
|
|
| Thanks guys ,as usual ,you guys come thru for me again !!!! |
|
|
|
