Author |
Topic: Marshall Transformer |
John Rickard
From: Phoenix (It's A Dry Heave) AZ
|
Posted 11 May 2000 12:34 pm
|
|
Does anyone know where I can get a "Drake Transformer T402" for a Marshall amp? Parts suppliers etc. Thanks in advance.
JR
------------------
Slide It On Over
|
|
|
|
Greg Derksen
From: Alberta, Canada
|
Posted 11 May 2000 1:26 pm
|
|
There is a site called www.toneheaven,
they specialize in used Marshalls. If not
type in Marshall I think thats how I found
it. Are you actually using it for steel?
Greg |
|
|
|
John Rickard
From: Phoenix (It's A Dry Heave) AZ
|
Posted 11 May 2000 3:44 pm
|
|
I tried it on my guitar and it had a great clean sound (not normal for most marshalls) and was about to try it on the steel when it probably sensed what I was about to do and decided to end its own life!
------------------
Slide It On Over
|
|
|
|
Jack Stoner
From: Kansas City, MO
|
Posted 11 May 2000 3:48 pm
|
|
Try Hoffman Amps, they have some Marshall power transformers listed on their web site.
http://www.hoffmanamps.com [This message was edited by Jack Stoner on 11 May 2000 at 04:49 PM.] |
|
|
|
Jay Ganz
From: Out Behind The Barn
|
Posted 12 May 2000 6:36 am
|
|
Or even www.mojotone.com
They have new replacements for Fender, Marshall, Vox, etc. |
|
|
|
John Rickard
From: Phoenix (It's A Dry Heave) AZ
|
Posted 12 May 2000 9:16 am
|
|
Thanks for the help, no one scored yet so keep'em coming.
JRwww.
toneheaven, link did not work?????[This message was edited by John Rickard on 12 May 2000 at 10:18 AM.] |
|
|
|
Donny Hinson
From: Glen Burnie, Md. U.S.A.
|
Posted 17 May 2000 4:44 pm
|
|
John,
Try this LINK for toneheaven. |
|
|
|
John Rickard
From: Phoenix (It's A Dry Heave) AZ
|
Posted 17 May 2000 6:54 pm
|
|
Thanks Donny,
Still searching & trying to avoid Korgs crazy prices.
JR
------------------
Slide It On Over
|
|
|
|
Hamilton Barnard
From: Oro Valley, Arizona (deceased)
|
Posted 19 May 2000 4:33 pm
|
|
John, is that a power or output transformer? Since you were asking about a Drake, I'm assuming that it is a 50 watt. If it is an output transformer, these guys have had great raves about their OT's http://www.obsoleteelectronics.com/index.htm .
I have heard horror stories about Tone Heaven (Tone Hell, some would say). Victor at Plexi Palace could also help ya out.
[This message was edited by Hamilton Barnard on 19 May 2000 at 07:42 PM.] |
|
|
|
Rich Paton
From: Santa Maria, CA.,
|
Posted 22 May 2000 8:57 pm
|
|
John, is that the 50W Marshal that uses two 6550 output tubes? Those ARE very clean with the volume control set low and the master volume set high or wide open.
Unfortunately, they have often suffered from transformer quality problems.
You could also try the amplifier bulletin board at:
http://www.vintageguitar.com
for an answer. |
|
|
|
John Rickard
From: Phoenix (It's A Dry Heave) AZ
|
Posted 22 May 2000 9:37 pm
|
|
It is a Marshall JTM 60 w/3 10" speakers.
JR
Thanks for the info, I'm not givin' up on this one, it sounds great when it's working!
------------------
Slide It On Over
|
|
|
|