| Author |
Topic: Take your pad off for better Ergonomics!! |
Johnie King
From:
Tennessee, USA
|
Posted 20 May 2023 4:28 pm |
|
If you have a thick pad on your Sd 10 that’s even with strings you might like this set up better.
Last edited by Johnie King on 29 May 2023 5:32 am; edited 6 times in total |
|
|
 |
Larry Dering
From:
Missouri, USA
|
Posted 20 May 2023 4:58 pm
|
|
| Not if it's Doug Jernigan. Seen him play using both necks on a song he wrote years. |
|
|
|
Carl Williams
From:
Oklahoma
|
Posted 21 May 2023 5:15 am
|
|
| Yes Larry…Doug J. playing Bonnie Marie…fine song and he could probably play it upside down and “bass-ackerds” as we use to say in Arkansas….right Johnnie? More power to ya…I’ll stay with trying to play one neck at a time… |
|
|
|
Richard Sinkler
From:
aka: Rusty Strings -- Missoula, Montana
|
Posted 21 May 2023 5:18 am
|
|
Watch is on the wrong arm?
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting. |
|
|
|
Lee Baucum
From:
McAllen, Texas (Extreme South) The Final Frontier
|
Posted 21 May 2023 9:21 am
|
|
| Richard Sinkler wrote: |
| Watch is on the wrong arm? |
Whose arm should it be on?
 |
|
|
|
Bob Sigafoos
From:
San Clemente, Calif. , U.S.
|
Posted 21 May 2023 10:01 am
|
|
| Obviously this gent is proud of his new 10” long bar! |
|
|
|
Jerry Overstreet
From:
Louisville Ky
|
|
|
|
Bruce Derr
From:
Lee, New Hampshire, USA
|
Posted 21 May 2023 2:08 pm
|
|
 [/img] |
|
|
|
Johnie King
From:
Tennessee, USA
|
Posted 21 May 2023 9:31 pm
|
|
Good guessing but it is wrist pain when I play a d10!.
 |
|
|
|
Johnie King
From:
Tennessee, USA
|
Posted 22 May 2023 4:19 pm
|
|
Wrist pain solved!!!
 |
|
|
|
Bobby D. Jones
From:
West Virginia, USA
|
Posted 22 May 2023 9:06 pm
|
|
| With Mr. Tommy White ordering a new Mullens Steel with the E9th neck on the back. Steel Guitar neck lay out may never be the same. |
|
|
|
Jim Sliff
From:
Lawndale California, USA
|
Posted 23 May 2023 10:51 am
|
|
| Richard Sinkler wrote: |
| Watch is on the wrong arm? |
I've always worn mine on the left wrist. So does every band member and friend I could find pics of. The only ones I know offhand that wear a watch on the right wrist are left handed!
_________________
No chops, but great tone
1930's/40's Rickenbacher/Rickenbacker 6&8 string lap steels
1921 Weissenborn Style 2; Hilo&Schireson hollownecks
Appalachian, Regal & Dobro squarenecks
1959 Fender 400 9+2 B6;1960's Fender 800 3+3+2; 1948 Fender Dual-8 Professional |
|
|
|
Johnie King
From:
Tennessee, USA
|
Posted 27 May 2023 4:42 am
|
|
Funny Jim but this thread is about the space between top an back neck height.
not a watch.
Last edited by Johnie King on 27 May 2023 5:18 am; edited 2 times in total |
|
|
|
Johnie King
From:
Tennessee, USA
|
Posted 27 May 2023 4:44 am
|
|
| Jim Sliff wrote: |
| Richard Sinkler wrote: |
| Watch is on the wrong arm? |
I've always worn mine on the left wrist. So does every band member and friend I could find pics of. The only ones I know offhand that wear a watch on the right wrist are left handed! |
|
|
|
|
Fred Treece
From:
California, USA
|
Posted 27 May 2023 8:11 am
|
|
Gotta watch watcha say aroun’ here!
The wrist pad on my Williams is the same height as the neck. Very sensible and much more comfortable than I thought it was going to be.
 |
|
|
|
Dave Mudgett
From:
Central Pennsylvania and Gallatin, Tennessee
|
Posted 27 May 2023 9:17 am
|
|
I believe this thread title was changed to discuss the pad - I recall the original thread was about playing both necks at the same time.
But now that it's about the pad - I actually like the slightly higher pad on my SD-10 because it reminds me to keep my wrists straight like this photo
I'm tall and sit fairly high. Even though I raise the steel, my arms are still angled down quite a bit. So there is a tendency to let my wrist bend like this, or even a little more extremely:
If I do that, I won't last long before I start to get some real wrist pain. Of course, not an issue on a D10 - the C6 strings digging into my wrists gives me that reminder to straighten out my wrists.
We're all different, ergo what passes for 'good' ergonomics is different. |
|
|
|
Johnie King
From:
Tennessee, USA
|
Posted 27 May 2023 2:41 pm
|
|
Just saying some Sd 10 steels pad is much too tall, some pads are same height as strings.
 |
|
|
|
Johnie King
From:
Tennessee, USA
|
Posted 28 May 2023 1:41 pm
|
|
| Ttt |
|
|
|
Ricky Davis
From:
Bertram, Texas USA
|
Posted 29 May 2023 6:52 am
|
|
Me being a physical therapist; I can tell you ergonomically, a bent wrist is BAD.. and ergonomically you really want your forearm parallel to the ground and elbow in straight below shoulder and you will get rid of a lot of tension of ligament and tendon fibers that eventually will cause lots of "repetitive motion" symptoms.
Ricky
_________________
Ricky Davis
Email Ricky: sshawaiian2362@gmail.com |
|
|
|
Ronald Sikes
From:
Corsicana, Tx
|
Posted 29 May 2023 7:57 am
|
|
Ricky , I didn’t know you were a P. T. My wife is a Physical Therapist (retired), and my daughter is graduating in August from UTMB Galveston with a Doctorate in PT.
Cheers my friend. Ron
_________________
Show Pro #26 & #83,BJS bars,Stereo Steel,Tommy Huff cabs loaded with JBL D130's, Wampler pedals,NV112,NV400, Steelers Choice Seats |
|
|
|
Ricky Davis
From:
Bertram, Texas USA
|
Posted 29 May 2023 9:37 am
|
|
| Quote: |
| Ricky , I didn’t know you were a P. T. |
Yeah Ronald; I was an Elite Gymnastics Coach pretty much through the 80's; so in college, being a gymnast; I knew I would eventually Teach gymnastics and athletics; but not wanting PT as carrer...so I just did Associate Degree; and after I had a kid make the 1988 Olympic Team to Korea; I dropped out of Teaching Athletics and became a Musician/Steel Player and taught Steel Guitar and also PGA Teaching Professional.. But now no more teaching of Any kind as I just turned 60; just play/produce/record music and restore Sho~bud's.
But yes; I can fix any physical prob. one may have....regular doctors still don't have a clue how the body moves and circulates...ha...(can you tell I don't care for Doctors...ha.....(ortho's are alright..ha...LOL)
Ricky
_________________
Ricky Davis
Email Ricky: sshawaiian2362@gmail.com |
|
|
|
Johnie King
From:
Tennessee, USA
|
Posted 29 May 2023 9:53 am
|
|
Ricky Sho Bud as a three quarter inch drop on back deck .
The later model name brand steels have a quarter inch drop on back neck.
Sho bud is the ideal steel for a pad.
 |
|
|
|
John Hyland
From:
South Australia
|
Posted 29 May 2023 12:10 pm
|
|
| Johnie King wrote: |
Ricky Sho Bud as a three quarter inch drop on back deck .
The later model name brand steels have a quarter inch drop on back neck.
Sho bud is the ideal steel for a pad.
|
As a single neck player I haven’t really understood why a padded rest is needed. |
|
|
|
Larry Allen
From:
Kapaa, Kauai,Hawaii
|
Posted 29 May 2023 2:55 pm Pad
|
|
Aloha Jonnie..here’s the pad I use on my S10,
 a computer wrist pad, $25 Amazon..just the right height for me! 
_________________
Excel steels & Peavey amps,Old Chevys & Motorcycles & Women on the Trashy Side |
|
|
|
Ricky Davis
From:
Bertram, Texas USA
|
Posted 29 May 2023 5:28 pm
|
|
Yes the back neck and/or pad and/or small ledge pad and/or no pad single-10; can ALL BE PLAYED ergonomically correct; by knowing and practicing those positions with arms and wrists I mentioned in my post above. NONE of the necks/pads/no pad should be any help in any way..as if your forearm is touching anything while you are moving side to side, will create a tension in playing and that is what we are all trying to overcome. Start with sitting height and the neck you play; are in position to have forearms parallel to the ground and on from there.
Ricky
_________________
Ricky Davis
Email Ricky: sshawaiian2362@gmail.com |
|
|
|
