| Author |
Topic: Broken B pedal |
Steven Golding
From:
New York, USA
|
Posted 15 Jun 2021 6:21 am |
|
Broke my B pedal last night while is was in the wood shed.
Are the pins that attach the pedals to the rack easy to remove?
I have a 70s MSA classic. I have two extra pedals I don’t use is it possible to remove one of those and replace the broken pedal.
Thanks
-s
 |
|
|
 |
David Nugent
From:
Gum Spring, Va.
|
Posted 15 Jun 2021 6:38 am
|
|
| Yes, simply remove the pedal housing and pedal in position '5' from the rack as a unit and swap with pedal '2'. This is a common problem with the old 'MSA' guitars. |
|
|
|
Jim Palenscar
From:
Oceanside, Calif, USA
|
Posted 15 Jun 2021 7:06 am
|
|
| The hole in the pedal just above the ball joint has an allen screw in it- loosen and remove pin- the pedal can be replaced for $40. |
|
|
|
Steven Golding
From:
New York, USA
|
Posted 15 Jun 2021 10:30 am
|
|
Thank you. I get nervous hitting this thing with a hammer, it’s old.
It’s was along easier than I thought.
S |
|
|
|
Al Evans
From:
Austin, Texas, USA
|
Posted 16 Jun 2021 5:35 am
|
|
| Jim Palenscar wrote: |
| The hole in the pedal just above the ball joint has an allen screw in it- loosen and remove pin- the pedal can be replaced for $40. |
This is what will work. Been there, done that (albeit for a different reason). You'd never know that allen screw was there unless somebody told you! 
--Al Evans
_________________
2018 MSA Legend, 2018 ZumSteel Encore, 2015 Mullen G2, G&L S-500, G&L ASAT, G&L LB-100, Godin A4 Fretless, Kinscherff High Noon |
|
|
|
Peter Harris
From:
South Australia, Australia
|
Posted 16 Jun 2021 11:14 pm
|
|
...good that it's sorted...
...next time, keep your back to the Steel when you're chopping wood... 
_________________
If my wife is reading this, I don't have much stuff....really! |
|
|
|
