| Author |
Topic: Peavey Parts |
Gary Watkins
From:
Bristol, VA
|
Posted 19 Feb 2021 6:49 pm |
|
Looking for two of the shiny metal strips that are on top of the NASHVILLE 400 amp. One on each side of the handle. I have tried calling Peavey, but they must be shut down because no one answers and they are not returning my calls.
Thanks,
Gary
_________________
If you succeed in cheating someone, don't think that the person is a fool. It's just that the person trusted you far more than you deserved. |
|
|
 |
Gary Watkins
From:
Bristol, VA
|
Posted 20 Feb 2021 8:55 am
|
|
_________________
If you succeed in cheating someone, don't think that the person is a fool. It's just that the person trusted you far more than you deserved. |
|
|
|
Jerry Overstreet
From:
Louisville Ky
|
Posted 20 Feb 2021 8:58 am
|
|
They are not available from Peavey or anywhere else that I know of and parts from other manufacturers won't fit either.
I ended up making a couple pair from alum. flat stock but of course they don't look the same.
Several guys here have searched unsuccessfully for these.
Unless you can find an old cabinet or parts from one that has been disassembled, I'm afraid you're out of luck. |
|
|
|
Dale Foreman
From:
Crowley Louisiana, USA
|
Posted 20 Feb 2021 10:25 am Straps
|
|
You should be able to make these with flat aluminum stock and then polish to a high shine.
_________________
Rittenberry Prestige(2) |
|
|
|
Gary Watkins
From:
Bristol, VA
|
Posted 20 Feb 2021 12:28 pm Re: Straps
|
|
| Dale Foreman wrote: |
| You should be able to make these with flat aluminum stock and then polish to a high shine. |
And I should be able to play the steel, but after 20 years, that isn't happening either, LOL!!!
_________________
If you succeed in cheating someone, don't think that the person is a fool. It's just that the person trusted you far more than you deserved. |
|
|
|
Paul Norman
From:
Washington, North Carolina, USA
|
Posted 24 Feb 2021 1:25 pm
|
|
Use these Paint them black if you like.
 |
|
|
|
Erv Niehaus
From:
Litchfield, MN, USA
|
Posted 25 Feb 2021 8:12 am
|
|
These straps for Fender amps are readily available but the ones for Peavey amps are no where to be found. 
Erv |
|
|
|
Bill A. Moore
From:
Silver City, New Mexico, USA
|
Posted 25 Feb 2021 9:24 am
|
|
I used the washers Paul showed when I built a cab for a SP130, seems to be plenty sturdy.
 |
|
|
|
Gary Watkins
From:
Bristol, VA
|
Posted 25 Feb 2021 9:27 am
|
|
| Paul Norman wrote: |
Use these Paint them black if you like.
|
Paul,
Please send me a link to get them.
Thanks,
Gary
_________________
If you succeed in cheating someone, don't think that the person is a fool. It's just that the person trusted you far more than you deserved. |
|
|
|
Gary Watkins
From:
Bristol, VA
|
Posted 25 Feb 2021 9:30 am
|
|
| Bill A. Moore wrote: |
I used the washers Paul showed when I built a cab for a SP130, seems to be plenty sturdy.
|
Bill,
It looks GREAT!! Please send me a link so I can get some.
Thanks,
Gary
_________________
If you succeed in cheating someone, don't think that the person is a fool. It's just that the person trusted you far more than you deserved. |
|
|
|
Richard Sinkler
From:
aka: Rusty Strings -- Missoula, Montana
|
|
|
|
Bob Tuttle
From:
Republic, MO 65738
|
Posted 25 Feb 2021 9:45 am
|
|
| Gary, These are #8 stainless steel finish washers. Send me a PM with your address and I'll mail you a few. |
|
|
|
