| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic How to connect two instrument output signals into one?
Goto page 1, 2  Next
Reply to topic
Author Topic:  How to connect two instrument output signals into one?
Steve Lipsey


From:
Portland, Oregon, USA
Post  Posted 7 Nov 2020 1:40 pm    
Reply with quote

Stereo guitar. One Fishman, one Lollar Silver Foil. Want the Fishman to go through a JD Aura, the Silver Foil to go through an overdrive. Both lines need to end up in a mono signal to some more effects and then to an amp.

I'll switch between them on the guitar, so only one line will be "active" at a time. Probably. It may be possible that I'd want both on at once occasionally (e.g., JD says that that lets him add some bottom end to his dobro, although he uses two totally separate signal paths and amplifiers). I'd give that up if it meant having to add more electronics....

Can I just join the two signals together after that point, using a ¼" Y-connector, or do I need an electronic connection? I'll want dual ¼" input and single ¼" output...
_________________
https://www.lostsailorspdx.com
Williams S10s, Milkman Pedal Steel Mini & "The Amp"
Ben Bonham Resos, 1954 Oahu Diana, 1936 Oahu Parlor


Last edited by Steve Lipsey on 7 Nov 2020 1:44 pm; edited 1 time in total
View user's profile Send private message Send e-mail Visit poster's website
Nicholas Cox


From:
CA
Post  Posted 7 Nov 2020 1:43 pm    
Reply with quote

You could get an A/B/Y box and then you could switch between or use both with the click of a footswitch.
View user's profile Send private message Send e-mail
Steve Lipsey


From:
Portland, Oregon, USA
Post  Posted 7 Nov 2020 1:49 pm    
Reply with quote

Re A/B box...yes, of course...but I was hoping to avoid that extra switch by just connecting the two signals together...having to switch pickups on the guitar then being the only thing needed,

I originally was planning just to run in mono and turn the Aura on when I was using the Fishman (maybe still the easiest way)...having a stereo connection would allow setting up pedal chains and then just switching on the guitar and not having to hit an extra switch on the pedalboard...

And I don't know what effect the Aura would have on the Silver Foil signal...might that be OK to leave it on when using the Silver Foil? What might it do to the sound? (I don't actually have the new Road-o-phonic yet).
_________________
https://www.lostsailorspdx.com
Williams S10s, Milkman Pedal Steel Mini & "The Amp"
Ben Bonham Resos, 1954 Oahu Diana, 1936 Oahu Parlor
View user's profile Send private message Send e-mail Visit poster's website
Jeff Highland

 

From:
New South Wales, Australia
Post  Posted 7 Nov 2020 5:32 pm    
Reply with quote

Are any of your effects Stereo? you could mix that way
_________________
Duesenberg Fairytale
1949 Supro Supreme
1950 National New Yorker
2008 Highland Baritone Weissenborn
2020 Highland New Yorker.
2020 Highland Mohan Veena
2021 Highland Weissencone
View user's profile Send private message Send e-mail
Bill McCloskey

 

Post  Posted 7 Nov 2020 5:55 pm    
Reply with quote

Why don’t you use a small mixer?
View user's profile Send private message
Steve Lipsey


From:
Portland, Oregon, USA
Post  Posted 7 Nov 2020 6:39 pm    
Reply with quote

No stereo effects. Still curious if I can just connect the outputs together....what will that cause?
_________________
https://www.lostsailorspdx.com
Williams S10s, Milkman Pedal Steel Mini & "The Amp"
Ben Bonham Resos, 1954 Oahu Diana, 1936 Oahu Parlor
View user's profile Send private message Send e-mail Visit poster's website
Nicholas Cox


From:
CA
Post  Posted 7 Nov 2020 6:44 pm    
Reply with quote

It would work but I believe there is some signal loss.
View user's profile Send private message Send e-mail
D Schubert

 

From:
Columbia, MO, USA
Post  Posted 7 Nov 2020 7:55 pm    
Reply with quote

Wiring a magnetic and piezo pickup together as a simple Y is not a good idea. While each one sounds good separately, they do not blend well. Much better to keep the two signals separate (two jacks) and send each signal through its' own pre-amp or amp channel.
View user's profile Send private message Send e-mail
Steve Lipsey


From:
Portland, Oregon, USA
Post  Posted 7 Nov 2020 8:08 pm    
Reply with quote

Thanks for the tips, all!
_________________
https://www.lostsailorspdx.com
Williams S10s, Milkman Pedal Steel Mini & "The Amp"
Ben Bonham Resos, 1954 Oahu Diana, 1936 Oahu Parlor
View user's profile Send private message Send e-mail Visit poster's website
Fred Treece


From:
California, USA
Post  Posted 7 Nov 2020 8:35 pm    
Reply with quote



The comment about signal loss (volume) with this particular gadget is very accurate. Maybe there is a higher end version of the device, I don’t know.

An ABY switch can be set with both inputs on at once - no switching. ART makes a pretty good one.

The suggestion for the little mixer is another good choice, though I think you’d have a volume issue there too. Once you get the levels set for each channel you’ll probably have to crank your amp for all the clean headroom you can get out of it.


Last edited by Fred Treece on 7 Nov 2020 10:24 pm; edited 1 time in total
View user's profile Send private message Send e-mail
Jeff Highland

 

From:
New South Wales, Australia
Post  Posted 7 Nov 2020 10:17 pm    
Reply with quote

I'd try it with a Y Connector.
Connectiong a peizo and a magnetic together is not a good idea as D Schubert says, but once they have gone through the aura and the overdrive respectively they are buffered and may combine successfully
_________________
Duesenberg Fairytale
1949 Supro Supreme
1950 National New Yorker
2008 Highland Baritone Weissenborn
2020 Highland New Yorker.
2020 Highland Mohan Veena
2021 Highland Weissencone
View user's profile Send private message Send e-mail
Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 8 Nov 2020 6:38 am    
Reply with quote

View user's profile Send private message Send e-mail
George Biner


From:
Los Angeles, CA
Post  Posted 8 Nov 2020 1:45 pm    
Reply with quote

While hard-wiring them together with an adapter is possible and may sound OK, what's going to happen is one device will load the other in unpredictable ways, so one or both of them will probably end up sounding funky.

Get a small mixer to do it right, that will load each signal properly and keep them isolated.
_________________
Guacamole Mafia - acoustic harmony duo
Electrical engineer / amp tech in West Los Angeles -- I fix Peaveys
"Now there is a snappy sounding instrument. That f****r really sings." - Jerry Garcia
View user's profile Send private message Send e-mail
Georg Sørtun


From:
Mandal, Agder, Norway
Post  Posted 8 Nov 2020 1:47 pm    
Reply with quote

Plugging the aura and the overdrive directly together at their outputs, is the same as short-circuiting one unit with the other and is a bad idea. They may survive thanks to the minute power through those units' outputs, but they will be highly unbalanced in volume, and most likely also in frequency range because of the high load.

At a minimum a 10Kohm (1/4 or 1/8 Watt type) series resistor should be added for each of those "buffers" outputs, inside an Y connector or wherever it is practical. That will balance out loads and levels for those "buffers" and keep them safe.
View user's profile Send private message Send e-mail Visit poster's website
Steve Lipsey


From:
Portland, Oregon, USA
Post  Posted 8 Nov 2020 1:52 pm    
Reply with quote

The Fishman Powerchip in the instrument provides automatic stereo or mono output for the Magnetic and Piezo pickups, depending on what kind of cord is plugged into it...I don't know how it combines the two outputs.

I have a call in to Fishman to see what they say - if it is simply a mechanical thing done in the jack or some electrical balancing thing done in the Powerchip...

https://www.fmicassets.com/Damroot/Original/10001/OM_leg_acougtr_Powerchip_User_Guide.pdf
_________________
https://www.lostsailorspdx.com
Williams S10s, Milkman Pedal Steel Mini & "The Amp"
Ben Bonham Resos, 1954 Oahu Diana, 1936 Oahu Parlor
View user's profile Send private message Send e-mail Visit poster's website
D Schubert

 

From:
Columbia, MO, USA
Post  Posted 8 Nov 2020 3:29 pm    
Reply with quote

From the PowerChip description, it is designed to deal with the imbalance. Looks like you balance the pickups by adjustment inside the guitar, and can't change on the fly. And it requires internal batteries, which have always been a pain for me.

I have two resonators with double pickups. Both are biscuit-cone but the principle still applies:

Guitar A: Lace Slimline (magnetic) pickup at the neck, Schatten NR-2 (piezo) mounted on the bridge. Each pickup wired directly to its' own 1/4" jack. No batteries.

Guitar B: National Slimline (magnetic) pickup at the neck, wired to volume and tone pots, then to a 1/4" jack. Schatten NR-2 (piezo) mounted on the bridge, wired to a single volume pot, then to its' own 1/4" jack. No batteries.

On stage: HOSA stereo cord to two-channel amplifier, two separate amplifiers, two channels of a mini-mixer, or two separate direct boxes of house sound system.
View user's profile Send private message Send e-mail
Bill Hatcher

 

From:
Atlanta Ga. USA
Post  Posted 10 Nov 2020 5:27 pm    
Reply with quote

there are several small mixers out there... one is small enough to be on a pedal board that have the correct input impedance to see guitar pickups. you can input 2 or more guitars...eq them...sum them to one out if you like and turn each one on an it wont affect the sound of the others. when you hook two or more together through the same path with no separation to one out you are going to get some strange sounds. like when you have a double or triple neck and turn on one neck, then turn on two necks or three together....your sound for each neck by itself is out the window.
View user's profile Send private message Send e-mail
Larry Dering


From:
Missouri, USA
Post  Posted 10 Nov 2020 5:50 pm    
Reply with quote


I use this and it works great. 99.00 at Sweetwater and several others. You can balance your levels or boost, switch between them or have both on.
View user's profile Send private message Send e-mail
Steve Lipsey


From:
Portland, Oregon, USA
Post  Posted 11 Nov 2020 1:11 pm    
Reply with quote

thanks again, folks...when the roadie arrives, I'll have lots to try (will report back then)!
_________________
https://www.lostsailorspdx.com
Williams S10s, Milkman Pedal Steel Mini & "The Amp"
Ben Bonham Resos, 1954 Oahu Diana, 1936 Oahu Parlor
View user's profile Send private message Send e-mail Visit poster's website
Brett Lanier

 

From:
Madison, TN
Post  Posted 11 Nov 2020 1:15 pm    
Reply with quote

I sometimes play with a fellow who has a pretty complicated acoustic rig, and he uses this Grace instrument pre to control some of it from the stage. https://gracedesign.com/products/instrument-preamplifiers/felix

He plugs a 1/4" trs cable into his guitar. There's a Fishman Matrix pickup system on the "T", a Sunrise magnetic soundhole pickup on the "R", and then he can eq each of those independently with the Grace.
View user's profile Send private message Send e-mail Visit poster's website
Steve Lipsey


From:
Portland, Oregon, USA
Post  Posted 29 Nov 2020 1:38 pm    
Reply with quote

OK...got the roadie.

I found these sources for an Active Combiner and a Stereo Cable:

Saturnworks Combiner, $74, gets great reviews. internal trimpot to equalize the sources:
https://www.etsy.com/listing/223374194/saturnworks-active-summer-combiner

Mogami custom-made stereo (and mono) cable, about $35
https://eventhorizon-srv.com/shop/mogami-2528-stereo-pickup-guitar-cable-p-5586

But when the Roadie came, I decided that I might want to feed both mag and piezo through the Aura, so I'm not (at least at present) going to split the signal into stereo.

I did modify the controls to make it easier to select mag/piezo/both by adding a pickup switch (see picture), as per the Fishman Powerchip manual (did have to mod the standard pickup switch to make it On-Off-On instead of On-On-On).

I put it in place of the mag tone control which, with the Lollar Silver Foil, just muddied up the tone....could add the tone back in by making the mag volume into a stacked volume/tone pot if I ever want to....





_________________
https://www.lostsailorspdx.com
Williams S10s, Milkman Pedal Steel Mini & "The Amp"
Ben Bonham Resos, 1954 Oahu Diana, 1936 Oahu Parlor
View user's profile Send private message Send e-mail Visit poster's website
Jack Hanson


From:
San Luis Valley, USA
Post  Posted 30 Nov 2020 7:02 am    
Reply with quote

I know lotsa folks aren't crazy about these things, but they're economical, bulletproof, readily available, and serve my porpoises well:
View user's profile Send private message Send e-mail
Steve Lipsey


From:
Portland, Oregon, USA
Post  Posted 30 Nov 2020 10:20 am    
Reply with quote

As people pointed out above, the passive combining boxes can mess with the signals by putting them into each other without some sort of active buffer in between....but sure, I've used those in the past...mostly to play one instrument at a time, not have both signals coming in together.
_________________
https://www.lostsailorspdx.com
Williams S10s, Milkman Pedal Steel Mini & "The Amp"
Ben Bonham Resos, 1954 Oahu Diana, 1936 Oahu Parlor
View user's profile Send private message Send e-mail Visit poster's website
Paul Seager


From:
Augsburg, Germany
Post  Posted 6 Dec 2020 10:47 am    
Reply with quote

For combining lap and pedal steel I favour the Boss LS2.its very versatile and one can usually find them on auctions quite cheaply. Another solution that I use and prefer for combining electric and upright bass is a Headway EDB-2. It's a preamp but has a good EQ that one may choose to assign to either or both channels. Not the cheapest solution but very high quality.

\paul
View user's profile Send private message Send e-mail
Paul Seager


From:
Augsburg, Germany
Post  Posted 7 Dec 2020 6:13 am    
Reply with quote

sorry I omitted to mention why I would recommend the Headway as a specific solution to your problem: It has two channels, each with a switch to cater for line, instrument or piezo signals. Here is a link to the Headway site:

https://www.headwaymusicaudio.com/product/edb-2/

\paul
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron