| Author |
Topic: Who made this quad necks Pedal bar? Maker and/or era |
Eugene Cole
From:
near Washington Grove, MD, USA
|
Posted 7 Nov 2020 5:37 pm |
|
I am wondering from what guitar this pedal bar is from. It is certainly not original to the guitar.
Photo 1:
Photo 2:
Photo 3:
The side hung pedal bars I am aware of were from early Steels like Harlin’s and the early (and rare) Gibson Electraharp’s. I am not familiar with nor have I owned either of those type of guitars; and this pedal assembly is not attached to either of these guitars.
_________________
Regards
-- Eugene <sup>at</sup> FJ45.com
PixEnBar.com
Cole-Luthierie.com
FJ45.com
Sierra U14 8+5 my copedent, 1972 MSA D10 8+4, and nothing in the Bank. 8^)
Last edited by Eugene Cole on 27 Nov 2020 4:05 pm; edited 2 times in total |
|
|
 |
Eugene Cole
From:
near Washington Grove, MD, USA
|
Posted 7 Nov 2020 5:44 pm
|
|
Photo 4:
Photo 5:
Thanks in advance for any information or references which you may have to offer.
_________________
Regards
-- Eugene <sup>at</sup> FJ45.com
PixEnBar.com
Cole-Luthierie.com
FJ45.com
Sierra U14 8+5 my copedent, 1972 MSA D10 8+4, and nothing in the Bank. 8^) |
|
|
|
Eugene Cole
From:
near Washington Grove, MD, USA
|
|
|
|
Richard Sinkler
From:
aka: Rusty Strings -- Missoula, Montana
|
Posted 12 Nov 2020 3:09 am
|
|
I've never seen one like that. Looks homemade to me. But, I have not seen every steel guitar ever made.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting. |
|
|
|
Bill Fisher
From:
Oklahoma, USA
|
Posted 12 Nov 2020 12:10 pm
|
|
How do you know it's from a guitar?
Bill |
|
|
|
Johan Jansen
From:
Europe
|
Posted 13 Nov 2020 2:08 am
|
|
| Electraharp? Gibson? |
|
|
|
Jon Zimmerman
From:
California, USA
|
Posted 15 Nov 2020 1:31 pm Other Harps?
|
|
They look too long for an Electraharp. My guess is a custom, late model Orchestral stand up Harp. Never laid eyes on this type before. Leverage points are too far from the pivots as well.  |
|
|
|
Patrick Thornhill
From:
Austin Texas, USA
|
Posted 15 Nov 2020 1:36 pm
|
|
| I was going to suggest Harp too, but I feel like their pedals tend to be oriented radially, in a semi-circle around the base. |
|
|
|
Jon Zimmerman
From:
California, USA
|
Posted 15 Nov 2020 1:42 pm Stump the Starz of Gee Tarz
|
|
| You’re correct, Patrick. The Harp pedals I have seen look more like ones under a grand piano and are much shorter. My other guess would be an actuator set for a multi-function punch press. That would be Industrial, not Musical. Seems to be angled for left-footed access. Some one will chime in soon with solution. |
|
|
|
Eugene Cole
From:
near Washington Grove, MD, USA
|
Posted 23 Nov 2020 10:40 am
|
|
| Bill Fisher wrote: |
How do you know it's from a guitar?
Bill |
I do not know that these pedals were from a guitar originally. They could have been taken from some other type of apparatus originally.
These pedals are from one of my instruments. I would gladly post additional photos if doing this would help.
_________________
Regards
-- Eugene <sup>at</sup> FJ45.com
PixEnBar.com
Cole-Luthierie.com
FJ45.com
Sierra U14 8+5 my copedent, 1972 MSA D10 8+4, and nothing in the Bank. 8^)
Last edited by Eugene Cole on 30 Nov 2020 6:43 pm; edited 1 time in total |
|
|
|
Eugene Cole
From:
near Washington Grove, MD, USA
|
Posted 27 Nov 2020 3:59 pm
|
|
The guitar has a 24.5†scale length.
Pedal lengths vary between about 4.75†and 11.â€
This is an odd duck of a guitar; but I think it will be fun to get it in to to good working order to play and try some new tunings.
I still need to obtain a pair of legs for it; the right-side legs Are missing and screw in to sockets.
It also has At least 1 bad tuner; so I will need to order a replacement tuner assembly from Fender. It is also missing one of the diamond shaped bolt/nut covers; so I may order a replacement for that if it is not too expensive.
Here are some additional photos of the guitar:
_________________
Regards
-- Eugene <sup>at</sup> FJ45.com
PixEnBar.com
Cole-Luthierie.com
FJ45.com
Sierra U14 8+5 my copedent, 1972 MSA D10 8+4, and nothing in the Bank. 8^) |
|
|
|
Eugene Cole
From:
near Washington Grove, MD, USA
|
Posted 6 Dec 2020 6:43 pm Re: Stump the Starz of Gee Tarz
|
|
| Jon Zimmerman wrote: |
| You’re correct, Patrick. The Harp pedals I have seen look more like ones under a grand piano and are much shorter. My other guess would be an actuator set for a multi-function punch press. That would be Industrial, not Musical. Seems to be angled for left-footed access. Some one will chime in soon with solution. |
Well whomever made the pedals; the wear clearly indicates that they got a great deal of use.
_________________
Regards
-- Eugene <sup>at</sup> FJ45.com
PixEnBar.com
Cole-Luthierie.com
FJ45.com
Sierra U14 8+5 my copedent, 1972 MSA D10 8+4, and nothing in the Bank. 8^) |
|
|
|
