| Author |
Topic: Mullen PRP Too Much Play in LKV |
Ryan Kliciak
From:
Alberta, Canada
|
Posted 26 Aug 2020 6:54 pm |
|
I am hoping someone can help me with an issue concerning the left vertical knee lever on my Mullen Pre Royal Precision (if it is abnormal). When I go to use it, there is a good amount of travel before it starts to engage the changers creating too much play and the rods with the nylon nuts protrude out the end further than any others. The crossrods are hex so if the knee lever or bell crank was tightened on the next flat, it would be too drastic.
Not sure of the terminology but I would describe it as a return stop (see picture), which if the top was extended upward, it would engage the bottom of the guitar sooner upon releasing the knee lever. This would prevent the crossrod from returning too far counter clockwise and reduce the slop in my knee lever.
Not relevant, it is lowering my E9th 5th and 10th string by half and lowering my 6th string by full. Thank you for reading taking the time to try and understand what I am describing! |
|
|
 |
Gene Tani
From:
Pac NW
|
Posted 26 Aug 2020 7:13 pm
|
|
seems like a lot of LKV threads recently..
If you call/ email the Mullen crew, they'll tell you anything you want to know really fast
https://mullenguitars.com/ (scroll way down)
_________________
- keyless Sonny Jenkins laps stay in tune forever!; Carter PSG
- The secret sauce: polyester sweatpants to buff your picks, cheapo Presonus channel strip for preamp/EQ/compress/limiter, Diet Mountain Dew |
|
|
|
Ryan Kliciak
From:
Alberta, Canada
|
Posted 27 Aug 2020 4:51 pm
|
|
Thank you Gene. I emailed Mullen and Mike was a great help. Thank you for taking the time out of your day Mike!
Best regards,
Ryan |
|
|
|
Mike Mantey
From:
Eastern Colorado, USA
|
Posted 31 Aug 2020 11:54 am
|
|
Anytime. Glad we could solve the adjustment issue.
Thank you for the referral Gene. BTW we now have our email right at the top of our Website.  |
|
|
|
