| Author |
Topic: Push pull parts shopping list. Where to get these? |
Marc Stone
From:
Louisiana, USA
|
Posted 30 Jun 2020 6:42 am |
|
My friend (lifelong P/P player and steel tech) is helping me get my recently acquired S8 p/p up to snuff. He sent me this parts list. Any info on best, and/or most economical while still being pro grade, place(s) to order these?
Also - the key head has long grooves in the nut instead of rollers. Want to remedy that. Thoughts?
Thx!
LKL kit (Complete)
LKR kit (complete)...{complete includes lever, shaft, mounting brackets, mounting screws, rods collars, spacers & springs}
2 PP lower rods
3 PP raise rods w hooks
13 rod collars
4-3/4†spacers
4-1/4†spacers
3 bell cranks |
|
|
 |
Erv Niehaus
From:
Litchfield, MN, USA
|
Posted 30 Jun 2020 8:12 am
|
|
My advise would be to trade of the guitar you have for one with all the things already in place. 
Erv |
|
|
|
john buffington
From:
Owasso OK - USA
|
Posted 30 Jun 2020 8:38 am
|
|
Jim Palenscar or Lynn Stafford or Jerry Roller would be a good source. Roller is my go to guy on my P/P's.
Last edited by john buffington on 30 Jun 2020 7:50 pm; edited 1 time in total |
|
|
|
Jerry Roller
From:
Van Buren, Arkansas USA
|
Posted 30 Jun 2020 8:45 am
|
|
Marc, i can help with everything except the keyhead rollers. Early ShoBud and others did not have nut rollers. I not sure it is economically wise to upgrade that guitar, but if it is built like the pro model D-10 it probably is. I would like to see a photo of it. rollermusic@cox.net
If you can find a machine shop you could have the keyhead grooved for rollers. You can use string ends for roller as Carter Starter did. Or, a set of roller (used) should be inexpensive, in fact I do have some of those.
Jerry
_________________
http://www.littleoprey.org/ |
|
|
|
Marc Stone
From:
Louisiana, USA
|
Posted 30 Jun 2020 9:02 am
|
|
Hey Jerry - thx so much.
I’ll hit you up directly |
|
|
|
Marc Stone
From:
Louisiana, USA
|
Posted 30 Jun 2020 9:09 am
|
|
| Erv - sounds great. Do you know of an 8 string w lap steel spacing kitted up w 6 or 7 total pedals/levers available? Lol |
|
|
|
Erv Niehaus
From:
Litchfield, MN, USA
|
Posted 30 Jun 2020 10:12 am
|
|
Marc,
Not right offhand.
Erv |
|
|
|
Jack Wilson
From:
Marshfield, MO
|
Posted 30 Jun 2020 7:33 pm knee lever
|
|
I have a non-original knee lever taken off an Emmons push pull $10 plus shipping
 |
|
|
|
Marc Stone
From:
Louisiana, USA
|
Posted 1 Jul 2020 2:40 am
|
|
| Thx Jack. Pretty sure I can use that. What’s the length? |
|
|
|
Mike Wilson
From:
Mansfield, Ohio, USA
|
Posted 1 Jul 2020 3:38 am
|
|
| Billy Knowles |
|
|
|
Norman Evans
From:
Tennessee
|
|
|
|
Michael Yahl
From:
Troy, Texas!
|
Posted 1 Jul 2020 6:05 am
|
|
Like Norm said,
I have most everything for the push/pull undercarriage.
https://psgparts.com/Emmons_c14.htm
_________________
"Don't fergit to kiss yer horse!"
'72 Sho-Bud Professional D10, (in pieces .....), '78 MSA Classic XL D10, '69 Emmons PP, Fender 2000
Peavey Session 500 BW, Crate Digital Modeling Amp
PSG PARTS
http://www.psgparts.com/ |
|
|
|
Craig A Davidson
From:
Wisconsin Rapids, Wisconsin USA
|
Posted 1 Jul 2020 8:00 am
|
|
| Yes go to Michael. His parts are spot on and work with no issues. |
|
|
|
Jack Wilson
From:
Marshfield, MO
|
Posted 1 Jul 2020 8:38 am length
|
|
overall 8 1/2"
black part about 6"
 |
|
|
|
