| Author |
Topic: How do I set milliseconds on Katana delay? |
George Kimery
From:
Limestone, TN, USA
|
Posted 9 Apr 2018 9:26 am |
|
Had this amp only 6 days. When I select delay, there is
a time delay of about one second and more than one repeat. It's totally useless. Is there a way to adjust the delay time to maybe 300 milliseconds and have only one repeat? I have watched a bunch of Demo's on YouTube, but none of them address this issue.
Thanks for any help.
PS: This amp is a keeper for a lot of reasons. |
|
|
 |
George Kimery
From:
Limestone, TN, USA
|
Posted 9 Apr 2018 10:21 am How do I set milliseconds on Katana delay?
|
|
| Never mind, I just figured it out. Simply tap the tap button numerous times instead of just once. |
|
|
|
Lee Baucum
From:
McAllen, Texas (Extreme South) The Final Frontier
|
Posted 9 Apr 2018 11:13 am
|
|
Here is a link to my post about the delay on the Cube 80XL.
I was wondering what the default delay time is. I counted how many times the light flashed per minute and came up with 145.
That translated to approximately 400ms.
Click Here
_________________
Lee, from South Texas - Down On The Rio Grande
There are only two options as I see it.
Either I'm right, or there is a sinister conspiracy to conceal the fact that I'm right.
Williams Keyless S-10, BMI S-10, Evans FET-500LV, Fender Steel King, 2 Roland Cube 80XL's,
Sarno FreeLoader, Goodrich Passive Volume Pedals, Vintage ACE Pack-A-Seat |
|
|
|
gary pierce
From:
Rossville TN
|
Posted 9 Apr 2018 12:33 pm
|
|
| You just have to tap it twice at the delay time you want. |
|
|
|
