| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic finger pick solution
Goto page 1, 2  Next
Reply to topic
Author Topic:  finger pick solution
David Sanderson

 

From:
Mayfield , Kentucky, USA
Post  Posted 4 Jan 2018 2:58 pm    
Reply with quote

Had JF picks and had to really adjust for tight fit to keep them from slipping.Never had good results and adjusted so much they cracked in the first holes from flexing so much.Asked on the forum where to get some more
of the JF picks and a friend from Virginia mailed me some he had used.When I looked at them after he sent them to me I thought they were ruined.He had ground the chrome off where they make contact on the inside with the fingers.Put some shrink tubing 1/4" on,put in pan of hot boilng water and now they do not move and and I don't have to adjust very tight at all.Don't put anything on them. Thanks to my friend in Virginia who sent them to me.Helped my playing a lot and I'm not telling I forgot his name.You know what I mean.Inever forget,just can't remember when I need to.
David
View user's profile Send private message Send e-mail
Tim Russell


From:
Pennsylvania, USA
Post  Posted 4 Jan 2018 4:06 pm    
Reply with quote

Heat shrink tubing is the key, no doubt! Only takes a small amount too. Smile
_________________
Sierra Crown D-10
View user's profile Send private message
Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 5 Jan 2018 9:04 am    
Reply with quote

It's hard to beat spit! Whoa!
View user's profile Send private message Send e-mail
Jerry Berger


From:
Nampa, Idaho USA
Post  Posted 5 Jan 2018 7:23 pm    
Reply with quote

Erv Niehaus wrote:
It's hard to beat spit! Whoa!


Hey Erv...over here in Idaho we are a little more sophisticated. We lick our finger tips before applying the picks. Laughing


Last edited by Jerry Berger on 8 Jan 2018 9:06 am; edited 1 time in total
View user's profile Send private message Send e-mail
Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 6 Jan 2018 8:51 am    
Reply with quote

Jerry,
Whatever works!! Laughing Laughing
View user's profile Send private message Send e-mail
Richard McVicker

 

From:
Indiana, USA
Post  Posted 6 Jan 2018 11:00 am    
Reply with quote

David
Sound like you are like a lot of players that struggle with finger picks I did also so I invented the new SADDLE finger picks . Most of us wear a wedding ring and never know we have it on even sleep with it on. What about a finger pick that work just like your wedding ring. That is it is loose fitting but won't come off because it is trapped behind the soft tissue in front of it. That's the structure behind the patented SADDLE finger pick.
When I am at a show I wear them all day. look at the video at.. saddlethumbpicks.com no spit, no gorilla snot, no pain, no constant adjusting while your playing because they are slipping off.
View user's profile Send private message
Jimmie Hudson

 

From:
North Carolina, USA
Post  Posted 6 Jan 2018 1:15 pm     Yep it works like glue
Reply with quote

Erv Niehaus wrote:
It's hard to beat spit! Whoa!

Works as well as glue or better!!!!!!!!!!!
View user's profile Send private message Send e-mail Visit poster's website
Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 7 Jan 2018 6:51 am    
Reply with quote

Jimmie,
Yes, I don't know what the big deal is with keeping finger picks on.
A little spit goes a looooong way.
It also works on thumb picks too. Very Happy
Erv
View user's profile Send private message Send e-mail
Ron Hogan

 

From:
Nashville, TN, usa
Post  Posted 7 Jan 2018 7:55 am    
Reply with quote

Jerry,
You just let the cat out of the bag. A little saliva on index and middle finger, locks the picks on.

I've done it for years. I guess you could dip your fingers in water and shake them off before outti g the licks on too.
View user's profile Send private message
Bobby Bonds Sr.

 

From:
Texas, USA
Post  Posted 7 Jan 2018 9:17 am     Picks
Reply with quote

After trying all the different picks, I wound up with the JF (Jeffran) pick. The factory bend is perfect for me. And I've been doing the spit trick also, gonna try the shrink tubing. Also the bar feels like a slippery ell, but a little spit does the trick.
View user's profile Send private message Send e-mail
Andrew Yanchick

 

From:
Pennsylvania, USA
Post  Posted 8 Jan 2018 5:43 am    
Reply with quote

what's a slippery ell?.
View user's profile Send private message Send e-mail
Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 8 Jan 2018 8:16 am    
Reply with quote

It's the first cousin to a slippery eel. Very Happy
Erv
View user's profile Send private message Send e-mail
John N Norris

 

From:
Georgia, USA
Post  Posted 15 Jan 2018 6:53 pm     Finger picks
Reply with quote

I picked up a small tube of children’s glue. The kind that is purple then turns clear when dry. It washes off real easy. A little dab on the thumb and fingers. No more worry with the picks sliding off.

John
View user's profile Send private message Send e-mail
Ray DeVoe

 

From:
Hudson, FL
Post  Posted 21 Jan 2018 8:24 am    
Reply with quote

Just as a question.

Are the J F picks still made? Are they .25 thickness or ?

That's all I have used for many years and I could use another set or two.

Thanks
Ray D
_________________
Zum SD 10 Hybrid, Zum D 10 Hybrid, Emmons SD 10 P.P.
SMS: Revelation & Classic Preamps: Furlong 12" Splits.
Webb 15" Splits: Telonics 500 C: Quilter-T.T.12":
View user's profile Send private message Send e-mail
Daniel Morris


From:
Westlake, Ohio, USA
Post  Posted 21 Jan 2018 1:54 pm    
Reply with quote

Ray, the Jeffran site just went live.
Pre-order on picks:
https://www.jeffrancollege.com/product-page/jeffran-nickel-silver-fingerpicks
_________________
1979 MSA U12 Pedal Steel
1982 Kline U12 Pedal steel
2019 Sierra U12 Pedal Steel
2011 Bear Creek MK Weissenborn
Milkman 40W Mini amp w/Telonics 15" speaker.
Dr. Z Surgical Steel w/TT 15" speaker.
Frenzel MB-50 head.
Spaceman, Empress, Eventide, Pigtronix.
View user's profile Send private message Send e-mail
Ray DeVoe

 

From:
Hudson, FL
Post  Posted 21 Jan 2018 2:19 pm    
Reply with quote

Thanks Daniel for the link to the site.

They don't say what the thickness is but they are heavy gauge for sure.

I will get my name on the list.

Ray D
_________________
Zum SD 10 Hybrid, Zum D 10 Hybrid, Emmons SD 10 P.P.
SMS: Revelation & Classic Preamps: Furlong 12" Splits.
Webb 15" Splits: Telonics 500 C: Quilter-T.T.12":
View user's profile Send private message Send e-mail
Sam White R.I.P.

 

From:
Coventry, RI 02816
Post  Posted 26 Jan 2018 7:51 am     Sam White
Reply with quote

Irv and Jerry you guys are right. I spit on my fingers every time and they stick like glue every time I put my picks on and never lose them.I PUT MY FINGERS IN MY MOUTH AND ALSO THE THUMB AND NEVER HAVE A PROBLEM.I EVEN DO IT WHEN I PLAY MY DYNA LAP 8 STRING LAP STEEL AND MY 6 string Dobro
Sam White
_________________
Dynalap lap 8 String Lap Steel Fender frontman 25B speaker changed Boss TU-12H Tuner.Founder and supporter of the Rhode Island Steel Guitar Association Founder of the New England Steel Guitar Association and the Greeneville TN Steel Jams and now founder of the North Carolina Steel Guitar Jams. Honorary member of the Rhode Island Steel Guitar Association,Member of The New England Steel Guitar Association.
Member of the Florida Steel Guitar Club,and member of Mid Atlantic Steel Guitar Association
View user's profile Send private message Send e-mail
Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 26 Jan 2018 8:03 am    
Reply with quote

Sam,
You are correct!
No need to make a mountain out of a molehill! Very Happy
Erv
View user's profile Send private message Send e-mail
Larry Lenhart


From:
Ponca City, Oklahoma
Post  Posted 26 Jan 2018 8:39 am    
Reply with quote

content removed, my remarks were not appropriate in this section.
_________________
Zum Encore, Remington D8 non pedal, Hallmark Mosrite clone, Gretsch 6120 DSW, Gretsch G5210T-P90 Electromatic Jet Two 90,1976 Ibanez L5, Eastman archtop, Taylor Dreadnaught, Telonics pedal, Squire Tele, Squire Strat, Fender Tonemaster, Gold Tone 5 string banjo, Little Wonder tenor banjo, 3 Roland cubes 30s and 80, Carvin combo bass amp


Last edited by Larry Lenhart on 30 Jan 2018 7:10 pm; edited 1 time in total
View user's profile Send private message Send e-mail
Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 26 Jan 2018 8:48 am    
Reply with quote

Just lick the tips of your fingers, that's all it takes. Very Happy
Erv
View user's profile Send private message Send e-mail
Bryan Staddon


From:
Buffalo,New York,
Post  Posted 29 Jan 2018 6:40 pm     It feels good!
Reply with quote

I know the spit works, but the shrink wrap is so comfortable. I love the way it feels.
_________________
You are me as I am you
View user's profile Send private message
Dale Rottacker


From:
Walla Walla Washington, USA
Post  Posted 30 Jan 2018 6:59 am    
Reply with quote

I used Nail Polish Remover in a jar that had a sponge in, that you just shoved your finger into and that would get all the oil’s off your fingers... Worked really well, but tasted bad if you stuck your fingers in your mouth later Laughing Laughing Laughing

I’ve also used rosin and Sticky Picks, which also work really well, but most of the time, I just lick my fingers, realize I should have washed them before I did that, and then carry on. Laughing Laughing Laughing
_________________
Dale Rottacker, Steelinatune™
https://www.youtube.com/@steelinatune
*2021 MSA Legend, "Jolly Rancher" D10 10x9
*2021 Rittenberry, "The Concord" D10 9x9
*1977 Blue Sho-Bud Pro 3 Custom 8x6
https://msapedalsteels.com
http://rittenberrysteelguitars.com
https://www.telonics.com/index.php
https://www.p2pamps.com
https://www.quilterlabs.com
View user's profile Send private message Send e-mail Visit poster's website
Bill Miller

 

From:
Gaspe, Quebec, Canada
Post  Posted 30 Jan 2018 9:12 am    
Reply with quote

Some people have more trouble keeping finger picks in place than others. It depends a lot on the shape of your fingers. I've never found an ideal solution to the problem personally, although coated picks help. But I can't wear two coated picks...too bulky and they drag against each other. So I use one coated and one plain...the plain one saliva fastened. That's a partial fix, but there's still a lot of room for someone to come up with a perfect solution. ( and I've already tried some of the ones being marketed which left me unimpressed )
View user's profile Send private message Send e-mail Visit poster's website
Jim Bob Sedgwick

 

From:
Clinton, Missouri USA
Post  Posted 1 Feb 2018 5:52 pm    
Reply with quote

Shrink wrap stops the annoying torn cuticles. I buy 1/4 inch wrap, spread the wrap with needle nose pliars to gain enough volume to go over the wrap of the finger pick. Shrink Them down with heat. They stay on great and are comfortable on your fingers. Occasionally you might have to replace them. No problem, just do as if they were new, with new wrap. No more sore fingers. Smile
View user's profile Send private message
Rene Brosseau


From:
Chatham,Ontario, Canada
Post  Posted 6 Feb 2018 8:24 pm     picks
Reply with quote

I won't use anything but Jeff Newman pics ! Yep, a little saliva on each finger & they don't move
_________________
Franklin #130, Melobar Skreemer, Wechter Scheerhorn Resonator, Nashville 112, Boss DD 3
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron