| Author |
Topic: gone |
Damir Besic
From:
Nashville,TN.
|
Posted 10 Nov 2017 1:54 pm |
|
...
_________________
www.steelguitarsonline.com
Last edited by Damir Besic on 20 Dec 2017 1:45 pm; edited 14 times in total |
|
|
 |
Damir Besic
From:
Nashville,TN.
|
Posted 10 Nov 2017 1:55 pm
|
|
...
_________________
www.steelguitarsonline.com
Last edited by Damir Besic on 20 Dec 2017 1:45 pm; edited 3 times in total |
|
|
|
Damir Besic
From:
Nashville,TN.
|
Posted 10 Nov 2017 1:56 pm
|
|
...
_________________
www.steelguitarsonline.com
Last edited by Damir Besic on 20 Dec 2017 1:46 pm; edited 3 times in total |
|
|
|
Damir Besic
From:
Nashville,TN.
|
Posted 10 Nov 2017 1:57 pm
|
|
...
_________________
www.steelguitarsonline.com
Last edited by Damir Besic on 20 Dec 2017 1:46 pm; edited 3 times in total |
|
|
|
Damir Besic
From:
Nashville,TN.
|
|
|
|
Jerry Horch
From:
Alva, Florida, USA
|
Posted 12 Nov 2017 2:40 pm
|
|
Nice....
_________________
Franklin D10 /Walker Sterio Steel JBL's /DigiTech Quad4/ Korg Toneworks/ Dobro DM 1000 / Santa Cruz Guitar VA |
|
|
|
Damir Besic
From:
Nashville,TN.
|
|
|
|
Damir Besic
From:
Nashville,TN.
|
|
|
|
Allen Howington
From:
North Carolina, USA
|
Posted 16 Nov 2017 7:48 pm Ritt
|
|
Man I sure wish I could deal you out of this one, beautiful guitar no doubt about it. Just too rich for my blood...
Steel buddy,
Allen Howington  |
|
|
|
Bill Lowe
From:
Connecticut
|
Posted 16 Nov 2017 8:59 pm
|
|
me too!!!!!!!!!!!!!
_________________
JCH D10, 71 D10 P/p fat back, Telonics TCA 500C--12-,Fender JBL Twin, Josh Swift signature. |
|
|
|
Damir Besic
From:
Nashville,TN.
|
|
|
|
Damir Besic
From:
Nashville,TN.
|
Posted 27 Nov 2017 9:12 am
|
|
ttt.... serious, like brand new, machine here .... if you ever wanted one of the best steels money can buy, here is your chance .... price is FIRM $5500 cash or may take another nice pro steel in partial trade... may take two or even three... I'm easy to deal with, talk to me 😊...
_________________
www.steelguitarsonline.com |
|
|
|
Damir Besic
From:
Nashville,TN.
|
Posted 27 Nov 2017 3:29 pm
|
|
...
_________________
www.steelguitarsonline.com
Last edited by Damir Besic on 20 Dec 2017 1:46 pm; edited 2 times in total |
|
|
|
Damir Besic
From:
Nashville,TN.
|
|
|
|
Bob Snelgrove
From:
san jose, ca
|
Posted 1 Dec 2017 6:51 am
|
|
Tell us about what makes the Prestige different than a regular Ritt? What are the screws below the changer?
bob |
|
|
|
Damir Besic
From:
Nashville,TN.
|
Posted 1 Dec 2017 6:56 am
|
|
| Quote: |
Introducing
the new
Rittenberry
"Prestige"
Model
Comments below by Wayne Dahl:
This project started about 14 months ago when I approached Gary about some ideas I had that might possibly make his fine guitar (that I was already playing) sound even better. He was very open and considered what I had to say! We talked about guitars like Sho~Bud, the Push-Pull Emmons and a few others, and the concepts about each of them and why they sounded like they did. I was searching for a guitar with a mid-range that had clarity and an evenness from top to bottom, and sustain. We tested aluminum cross shafts, both square and hexagon, as well as round stainless steel. We concluded hands down the stainless steel had the best bell-like tone and would contribute to the tone of the guitar. Wood to metal contact and no plastic, we decided, was also a piece of the puzzle. We went from one end of the guitar to the other, making improvements where need be, always keeping tone and resonance in mind. The mechanics of this guitar didn't go unnoticed either. It's solid from top to bottom! It also tunes out perfectly, with a minimal cabinet drop of 2 cents on the "E" strings. Its bar-non the best sounding/playing guitar I've ever owned, with all the qualities that I was looking for as I described. Many of the pro players at the Dallas show recently (according to Gary) were knocked out about the tone and play-ability of this guitar. Lastly, the "Prestige" is a tribute guitar to 3 steel guitar builders that helped Gary along the way, they are: Jimmie Crawford, Dwayne Marrs and Paul Franklin Sr. A big thank you to each of them! So, after 14 months and a lot of hard work, mainly on Gary's part, I think we have a winner here. So, thank you Gary Rittenberry so much for making this all a reality... |
from Rittenberry Guitars website
also you can see and hear Wayne playing his Prestige here
https://youtu.be/VJ5fqvUYbNs
_________________
www.steelguitarsonline.com |
|
|
|
Bob Snelgrove
From:
san jose, ca
|
Posted 1 Dec 2017 8:29 am
|
|
| Damir Besic wrote: |
| Quote: |
Introducing
the new
Rittenberry
"Prestige"
Model
Comments below by Wayne Dahl:
This project started about 14 months ago when I approached Gary about some ideas I had that might possibly make his fine guitar (that I was already playing) sound even better. He was very open and considered what I had to say! We talked about guitars like Sho~Bud, the Push-Pull Emmons and a few others, and the concepts about each of them and why they sounded like they did. I was searching for a guitar with a mid-range that had clarity and an evenness from top to bottom, and sustain. We tested aluminum cross shafts, both square and hexagon, as well as round stainless steel. We concluded hands down the stainless steel had the best bell-like tone and would contribute to the tone of the guitar. Wood to metal contact and no plastic, we decided, was also a piece of the puzzle. We went from one end of the guitar to the other, making improvements where need be, always keeping tone and resonance in mind. The mechanics of this guitar didn't go unnoticed either. It's solid from top to bottom! It also tunes out perfectly, with a minimal cabinet drop of 2 cents on the "E" strings. Its bar-non the best sounding/playing guitar I've ever owned, with all the qualities that I was looking for as I described. Many of the pro players at the Dallas show recently (according to Gary) were knocked out about the tone and play-ability of this guitar. Lastly, the "Prestige" is a tribute guitar to 3 steel guitar builders that helped Gary along the way, they are: Jimmie Crawford, Dwayne Marrs and Paul Franklin Sr. A big thank you to each of them! So, after 14 months and a lot of hard work, mainly on Gary's part, I think we have a winner here. So, thank you Gary Rittenberry so much for making this all a reality... |
Not fair! Wayne can make a tin can sound amazing  Just kidding kinda but wow.
bob
from Rittenberry Guitars website
also you can see and hear Wayne playing his Prestige here
https://youtu.be/VJ5fqvUYbNs |
|
|
|
|
Godfrey Arthur
From:
3rd Rock
|
Posted 1 Dec 2017 8:43 am
|
|
The guitar looks like a Cadillac build.
Always liked Wayne's playing.
_________________
ShoBud The Pro 1
YES it's my REAL NAME!
Ezekiel 33:7 |
|
|
|
Roger Crawford
From:
Griffin, GA USA
|
Posted 1 Dec 2017 10:49 am
|
|
| Screws below the changer, if the ones in the end of the neck, split tuning for strings that have both a raise and a lower that need the resulting note tuned to proper pitch. If the ones in the end plate below the nylon tuners, adjustment of the spring tension. |
|
|
|
Damir Besic
From:
Nashville,TN.
|
|
|
|
Jake L
From:
Grapevine, Texas
|
Posted 5 Dec 2017 12:27 pm
|
|
| How do these guitars compare sizewise with a Mullen G2 or Carter? I'm kinda short, and have found that Emmons and Zum are just a little too large for me to comfortably play. |
|
|
|
Damir Besic
From:
Nashville,TN.
|
Posted 5 Dec 2017 12:53 pm
|
|
| Jake L wrote: |
| How do these guitars compare sizewise with a Mullen G2 or Carter? I'm kinda short, and have found that Emmons and Zum are just a little too large for me to comfortably play. |
it fits great for me, but then again , I’m 6’5†and over 300lbs lol
_________________
www.steelguitarsonline.com |
|
|
|
Damir Besic
From:
Nashville,TN.
|
|
|
|
Ron Hogan
From:
Nashville, TN, usa
|
|
|
|
Damir Besic
From:
Nashville,TN.
|
|
|
|
