| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic String Break Predictor
Reply to topic
Author Topic:  String Break Predictor
David Cubbedge


From:
Toledo,Ohio, USA
Post  Posted 7 Feb 2017 6:02 am    
Reply with quote

Last night while attempting some recording, I noticed a funny sound coming from my E-string (4th). It sounded like the string was going "wow" with its' tone instead of a nice steady "ooooo". It was very annoying. Nothing I did with tuning, tone settings or isolating components would cure the "wow" sound on the string. It really stuck out like a sore thumb and more noticeable between open and 12th frets. Then the string broke! Replaced it with a new Jagwire and guess what? Annoying tone on that string is gone!

My guess is that as the cell structure of the metal failed it created this weird tone and now I might know when a non-wound string is about to fail!
_________________
Red Emmons D10 fatback #2246D with sweet Hugh Briley split cases, Black Emmons S10 #1466S, '73 Fender "Snakeskin" Twin Reverb, Peavey Nashville 400, Line 6 Pod XT, Fender 400, Fender Stringmaster Double-8, too many guitars, one bass!
View user's profile Send private message Send e-mail
Jon Light


From:
Saugerties, NY
Post  Posted 7 Feb 2017 6:11 am    
Reply with quote

I have had this same experience numerous times and each time it is like it's the first time. Somehow, when I get a bad sounding string with funky overtones I start chasing down the cause, forgetting that it is so often a presaging of string failure. Then the string pops and I say oh yeah, that's right.....
View user's profile Send private message Send e-mail Visit poster's website
Jack Stoner


From:
Kansas City, MO
Post  Posted 7 Feb 2017 7:39 am    
Reply with quote

That was a "predictor", but in my experiences a string breakage will "just happen".

I change strings regularly (at least once a month or about 10 shows) so my string breakage is rare.


Last edited by Jack Stoner on 7 Feb 2017 10:05 am; edited 1 time in total
View user's profile Send private message Send e-mail
David Cubbedge


From:
Toledo,Ohio, USA
Post  Posted 7 Feb 2017 9:06 am    
Reply with quote

Since I do only about ten shows per year, my string change frequency has suffered.....
_________________
Red Emmons D10 fatback #2246D with sweet Hugh Briley split cases, Black Emmons S10 #1466S, '73 Fender "Snakeskin" Twin Reverb, Peavey Nashville 400, Line 6 Pod XT, Fender 400, Fender Stringmaster Double-8, too many guitars, one bass!
View user's profile Send private message Send e-mail
Rich Upright


From:
Florida, USA
Post  Posted 7 Feb 2017 3:33 pm    
Reply with quote

30 years of playing steel & never broken an "E" string.
Come to think of it, I haven't broken a G# in years. Prolly 'cause I change every 8-10 gigs.
_________________
A couple D-10s,some vintage guitars & amps, & lotsa junk in the gig bag.
View user's profile Send private message Send e-mail
Mitch Ellis

 

From:
Collins, Mississippi USA
Post  Posted 7 Feb 2017 8:17 pm     Re: String Break Predictor
Reply with quote

David Cubbedge wrote:
Last night while attempting some recording, I noticed a funny sound coming from my E-string (4th). It sounded like the string was going "wow" with its' tone instead of a nice steady "ooooo". It was very annoying.


David,
I once noticed the exact same sound with my steel but on the 5th string. I removed the string and examined it very closely (with a magnifying glass) where it touched the top of the changer finger. I saw the problem. Believe it or not, the string had actually cracked only half way through! After I removed the string, I started to bend it slightly backwards and it broke at the slightest touch. I replaced the string and the problem was gone. I never would have thought that a string could only crack and not break.

Mitch
View user's profile Send private message

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron