| Author |
Topic: New Pot for Nashville 112 |
Richard Alderson
From:
Illinois, USA
|
Posted 15 Jul 2016 3:59 pm |
|
Where can I get a new potentiometer for the master volume of my 112? Are there upgrade possibilities? What should I be looking for on the Peavey web site?
Thank you
_________________
Derby SD-10 5x6; GFI S-10 5x5; GFI S-10 5x5; Zum D-10 8x7; Zum D-10 9x9; Fender 400; Fender Rumble 200; Nashville 400; Telonics TCA-500. |
|
|
 |
Scott Duckworth
From:
Etowah, TN Western Foothills of the Smokies
|
Posted 15 Jul 2016 5:08 pm
|
|
If there's an updated part, Peavey will have it. I'd start with tech support.
_________________
Amateur Radio Operator NA4IT (Extra)
http://www.qsl.net/na4it
I may, in fact, be nuts. However, I am screwed onto the right bolt... Jesus! |
|
|
|
David Nugent
From:
Gum Spring, Va.
|
Posted 15 Jul 2016 5:18 pm
|
|
| Due to the manufacturing process used, may need to ship the chassis to Peavey to have the pot replaced. Recommend contacting Mike Brown for information. |
|
|
|
Jack Stoner
From:
Kansas City, MO
|
Posted 16 Jul 2016 2:05 am
|
|
| I've never heard of an "upgraded" pot. But you do need to contact Peavey parts to get the correct pot as it mounts (soldered) to the preamp board (which will require removal to replace the pot). |
|
|
|
Richard Keller
From:
Deer Creek, Illinois, USA
|
Posted 16 Jul 2016 5:05 am
|
|
I replaced a pot in my Nashville 112. I bought the pot from Peavey's service and parts department and soldered onto the board. It wasn't too hard to do.
I was surprised at how reasonable the prices are on Peavey parts. Very inexpensive. |
|
|
|
Richard Alderson
From:
Illinois, USA
|
Posted 16 Jul 2016 5:46 am
|
|
Thanks guys - will be on the phone with Peavey today if they are open, Monday if not, I will PM Mike Brown.
_________________
Derby SD-10 5x6; GFI S-10 5x5; GFI S-10 5x5; Zum D-10 8x7; Zum D-10 9x9; Fender 400; Fender Rumble 200; Nashville 400; Telonics TCA-500. |
|
|
|
