Billy Knowles in NC

Tony Prior · From: Charlotte NC

Well as some may know, a few months back I picked up an 81 Emmons Push Pull, very nice guitar, has that Push Pull growl. But in my less than infinite wisdom I tinkered with the ABC peds and kinda got it outta' joint by ever so much. I'm good with All Pulls but the part of my brain that was reserved for Push Pull knowledge is empty.

I have been wanting to pay a visit to Billy Knowles over in Kenansville NC for a while so this was the time.

Billy went thru my Steel and gave me yet another lesson on setup and PP related stuff !

Sure I can read about the PP setup but you can't beat being in the presence of those in the know , those that were there when it was all going down.

Visiting Billy was a real pleasure , not just to tap his brain for additional PP knowledge but the conversations that went along with it.

We also talked in great depth about the Legrandes of which I also recently acquired a LII.

Living in NC, evidently is a very good thing for those of us who are seeking Emmons Guitar wisdom . We have several "Emmons" folks in the area.

Oh yeah, I'm dangerous now, if you call me and ask me to setup your PP and I say ok, I can do it , run for the hills ! Laughing

Thanks Billy, see you again my friend !

I highly recommend Billy for your Steel needs...
_________________
Emmons L-II , Fender Telecasters, B-Benders , Eastman Mandolin ,
Pro Tools 12 on WIN 7 !
jobless- but not homeless- now retired 9 years

CURRENT MUSIC TRACKS AT > https://tprior2241.wixsite.com/website

George Seymour · From: Notown, Vermont, USA

+1 on that!!
_________________
Old Emmons D-10's & Wrap Resound 65, Standel amps!
Old Gibson Mastertones

David Nugent · From: Gum Spring, Va.

Tony..You didn't happen to spot a D-10 Rosewood SKH LeGrande on your visit? Billy informed me that my total rebuild should be completed next week and its arrival is highly anticipated!!

Tony Prior · From: Charlotte NC

Billy had a couple of Legrandes in process which he showed me and we talked about ,I think one was a Rosewood.

t
_________________
Emmons L-II , Fender Telecasters, B-Benders , Eastman Mandolin ,
Pro Tools 12 on WIN 7 !
jobless- but not homeless- now retired 9 years

CURRENT MUSIC TRACKS AT > https://tprior2241.wixsite.com/website

Clyde Mattocks · From: Kinston, North Carolina, USA

I am blessed to live close to Billy, but even more so to call him one of my closest friends.
_________________
LeGrande II, Nash. 112, Fender Twin Tone Master, Session 400, Harlow Dobro, R.Q.Jones Dobro

Teddy Lloyd · From: Virginia, USA

Billy is the best

Ricky Hagan · From: Elm City N.C. U.S.A.

I second everything Clyde said. Billy is one of a kind. Simply the best.

Sid Hudson · From: Virginia, USA

fabulous technician.
_________________
www.lsstrings.com

Ken Byng · From: Southampton, England

Billy is a great repair man and a wonderful human being.
_________________
Show Pro D10 - amber (8+6), MSA D10 Legend XL Signature - redburst (9+6), Sho-Bud Pro 111 Custom (8+6), Emmons black Push-Pull D10 (8+5), Zum D10 (8x8), Hudson pedal resonator. Telonics TCA-500, Webb 614-E,

Gary Cooper · From: Atmore, Alabama

Billy builds a great seat too!!!!!
_________________
GFI Ultra SD-10; Nashville 112; Hilton pedal, George L Cables; Pearse bar; Live Stings;Walker seat by Billy Knowles.

john widgren · From: Wilton CT

Billys talents are awesome. Brilliant. He is also one of the most generous a kind people I have ever had the pleasure of knowing in PSG community. Top shelf!

Happy Holidays,

JW
_________________
Steel Guitar Services:
Live performance and recording. Instruments, repairs and lessons. Fresh bait/discount sushi.
(203) 858-8498
widcj@hotmail.com

Walter Bowden · From: Wilmington, North Carolina, USA

Billy has "tweaked" my S10 p/p a couple of times and it always leaves his place better than it came in. I learn a few new things too.

Knowing he is only about a 45 minute drive from my place is a HUGE security blanket and he is about as nice a guy as you will ever meet.

Come to think of it, it might be a good time to schedule a 50,000 mile tuneup visit to Steel Guitars East.

As long as we have steel guitar mechanics like Billy Knowles you should never hesitate in getting an Emmons guitar.

P. S. He is also a very well respected and accomplished ZB steel guitar mechanic too.

Merry Christmas Billy and health and happiness to you and yours.

Walter
_________________
Emmons S10, p/p, Nashville 112, Zion 50 tele style guitar, Gibson LP Classic w/Vox AC30, Fender Deluxe De Ville and a Rawdon-Hall classical

Bill Erchul · From: Raleigh, NC, USA

I've said it before here, but Billy Knowles is an exceptionally talented person who works wonders on pedal steel guitars. He is patient, listens carefully, and is not satisfied until you are. If you need any repairs, adjustments, modifications, etc., you should contact Billy.

Hugh Jackson · From: Dunn North Carolina

Nice Guy

Hook Moore · From: South Charleston,West Virginia

Tony Prior · From: Charlotte NC

I would be remiss by not mentioning my friend Doug Palmer in Greensboro NC as well, also an experienced Emmons tech. Doug gave me my first hands on with the PP, enough to make me real dangerous ! Here in NC we are pretty fortunate to have both Billy and Doug to call on. Both worked at Emmons in Burlington with Ron Sr. Both excellent guys with enough stories to fill a sock. Laughing

_________________
Emmons L-II , Fender Telecasters, B-Benders , Eastman Mandolin ,
Pro Tools 12 on WIN 7 !
jobless- but not homeless- now retired 9 years

CURRENT MUSIC TRACKS AT > https://tprior2241.wixsite.com/website

Kevin Hatton · From: Buffalo, N.Y.

Another thumbs up for Billy Knowles. Great tech and great person.

Forum Index > Pedal Steel		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: