| Author |
Topic: Carpsteel - Reborn |
Wallace Pelton
From:
Waco, Texas, USA
|
Posted 14 Jan 2014 8:01 am |
|
After I bought my SD10 Rains to use as my main guitar (with the band), I started looking for a smaller, lighter, good quality, "practice" steel.
I found this "basketcase", Carpsteel that someone had painted red with a spray can. I stripped the guitar down and took it to Hydrographics for a snakeskin dip finish. After re-conditioning everything and putting the guitar back together...I think it looks awesome!
Many thanks to Gary Carpenter for helping supply me with missing/damaged parts.
 |
|
|
 |
Dale Ware
From:
Texas, USA * R.I.P.
|
Posted 14 Jan 2014 9:57 am Carp Steel
|
|
| Wallace, great job. I can't wait to see it. Dale |
|
|
|
Scott Duckworth
From:
Etowah, TN Western Foothills of the Smokies
|
Posted 14 Jan 2014 11:20 am
|
|
I wanna see a bigger picture, and explain the "dip" process please.
_________________
Amateur Radio Operator NA4IT (Extra)
http://www.qsl.net/na4it
I may, in fact, be nuts. However, I am screwed onto the right bolt... Jesus! |
|
|
|
Will Cowell
From:
Cambridgeshire, UK
|
Posted 14 Jan 2014 11:57 am
|
|
That is one tasty snakeskin effect....
_________________
Williams 700 series keyless U12,
Sierra keyless U14, Eezzee-Slide & BJS bars
Moth-eaten old Marshall 150 combo
Roland Cube 80XL, Peterson Strobo+HD,
EarthQuaker Despatch Master for reverb / delay |
|
|
|
Wallace Pelton
From:
Waco, Texas, USA
|
Posted 14 Jan 2014 12:19 pm
|
|
| Scott, you can Google HydroGraphics and see how the process works. They have hundreds of patterns to choose from. Used a lot for firearms, automotive and motorcycle parts. Doubt there are any more steel guitars with this finishing process applied to them. I will work on getting a larger/more detailed picture to post. Thanks for your favorable comments everyone, I thought it would be a hit. |
|
|
|
Wallace Pelton
From:
Waco, Texas, USA
|
Posted 14 Jan 2014 12:35 pm
|
|
 |
|
|
|
Scott Duckworth
From:
Etowah, TN Western Foothills of the Smokies
|
Posted 14 Jan 2014 12:59 pm
|
|
Very nice, and thanks for the info on the process! Enjoy your "new" steel!
_________________
Amateur Radio Operator NA4IT (Extra)
http://www.qsl.net/na4it
I may, in fact, be nuts. However, I am screwed onto the right bolt... Jesus! |
|
|
|
Larry Jamieson
From:
Walton, NY USA
|
Posted 14 Jan 2014 4:17 pm
|
|
| Cool! Hope it doesn't bite... |
|
|
|
Brendan Mitchell
From:
Melbourne Australia
|
Posted 14 Jan 2014 4:19 pm
|
|
| That is amazing . I just looked at some hydrographic stuff on the Internet . Is this the same as some Carson fibre wrapped guitars we have seen on here ? |
|
|
|
K Maul
From:
Hadley, NY/Hobe Sound, FL
|
Posted 15 Jan 2014 6:38 am
|
|
So...what is involved in prep for this process? Must all hardware be removed? Strings,changer,tuners,headstock,undercarriage,etc?
It looks absolutely great. |
|
|
|
Wallace Pelton
From:
Waco, Texas, USA
|
Posted 15 Jan 2014 12:11 pm
|
|
The folks that do this can tape off parts of the object. But since I was planning to re-condition the entire guitar, I stripped everything off. It did take some time to get it ready and more time to get the guitar back together and set up everything to get it ready to play. I enjoy "tinkering" with things, so it was worth the time and effort for me.
 |
|
|
|
