| Author |
Topic: Anvil type case, $80 obo |
Stephen R. Feldman
From:
Takoma Park, MD
|
Posted 19 Dec 2013 10:12 am |
|
Hello All,
Don't know age, but latches and everything else, except
the foam, is in good mechanical
shape (some rust, scratches, etc.).
Three recessed handles!
Label says:
"Calzone Case Co.
P.O. Box 862
S. Norwalk, CT
08856
Tel.203-853-7907
The guy before me had some sort of pedal board in it,
I never got around to using it as an instrument case....
Outside measurements are aprox.
19"X 9.5" X 37"
I'd be willing to trade this case for
something that has inside dimensions of
13"X 35" X 8" (for use as "split" case for Dekley 2X12 pedal steel)
cosmetics unimportant...
Best to call on the phone,
Thanks,
Steve
301-559-1646
Last edited by Stephen R. Feldman on 20 Dec 2013 5:52 pm; edited 1 time in total |
|
|
 |
Nick Koff
From:
Lost Angeles, California
|
Posted 20 Dec 2013 1:39 am
|
|
Hopefully first in at 1:40 AM PST. I will call you in the morning.
_________________
Just another belt & suspenders guy... |
|
|
|
Stephen R. Feldman
From:
Takoma Park, MD
|
Posted 20 Dec 2013 4:09 am Your photography....
|
|
Hey, I wish I could have seen
Danny O'Keefe! He never gets out here.
Great first recording. |
|
|
|
Craig Schwartz
From:
McHenry IL
|
Posted 20 Dec 2013 5:01 am
|
|
Can I second this , just in case... 
_________________
SO MANY LURES, SO LITTLE TIME....
Last edited by Craig Schwartz on 22 Dec 2013 12:18 pm; edited 1 time in total |
|
|
|
Stephen R. Feldman
From:
Takoma Park, MD
|
Posted 20 Dec 2013 5:39 am MSA case
|
|
Hello,
The critical measurement is the
8" height, because the joints on the
knee levers extend under the guitar
by about 2". (L = 35" with room for the padding, and width = 13" just to be safe).
Thanks,
Steve
301-559-1646 |
|
|
|
Craig Schwartz
From:
McHenry IL
|
Posted 20 Dec 2013 7:34 am
|
|
PM sent
_________________
SO MANY LURES, SO LITTLE TIME.... |
|
|
|
Stephen R. Feldman
From:
Takoma Park, MD
|
Posted 20 Dec 2013 8:56 am Craig, please try again
|
|
Hello Craig,
I didn't get it, please try again.
Thanks,
Steve |
|
|
|
Craig Schwartz
From:
McHenry IL
|
Posted 22 Dec 2013 6:13 pm
|
|
Stephen , I will refer this add to a friend of mine that does sound for a rock band, I think this would be great for an audio box,
_________________
SO MANY LURES, SO LITTLE TIME.... |
|
|
|
Stephen R. Feldman
From:
Takoma Park, MD
|
Posted 23 Dec 2013 4:10 am Anvil type case
|
|
Hello Craig,
That's what it should be
used for. I don't want to
mislead anyone, the foam's
there, but if you're putting
a board in it, I'd want to
put some vinyl or cloth over
the foam.
Note that I said "obo". It's
about 35 lbs., so I'm hoping
someone local gets it, but
it may be worth it to send it
for someone.
Thanks again,
Steve
301-559-1646 |
|
|
|
