| Author |
Topic: MCI Parts |
John Shadid
From:
Oklahoma City, OK
|
Posted 26 Apr 2012 12:00 pm |
|
I need 10 matching pull rods and pull bars to fit the E9 neck on my D-10 MCI. I'd prefer something in the Carter or Dekley "center pull" area rather than the Fessenden side pull type. Any help is appreciated!
_________________
Johnny Up PSG Lessons @
http://www.youtube.com/user/johnnyupok |
|
|
 |
John Shadid
From:
Oklahoma City, OK
|
|
|
|
Jerry Roller
From:
Van Buren, Arkansas USA
|
Posted 27 Apr 2012 9:18 am
|
|
John, I did post that I had some MCI bellcranks and asked for size of your cross shafts, then it occured to me that you stated you wanted a different type so I tried to sneak out without being noticed. 
Jerry |
|
|
|
John Shadid
From:
Oklahoma City, OK
|
Posted 27 Apr 2012 10:31 am
|
|
Well, I was just talking to Bud, as I acquired a guitar he used to own. The e9 neck bell cranks and pull rods were switched out. Somewhere along the way, the right knee levers lost 3 pull rods and the 3 circular pieces that lock the rod into the bellcrank with a hex key. I'd replace just those 3 if having non matching pieces underneath wouldn't affect the guitars function. Any thoughts? I can email u some pics if that would help.
_________________
Johnny Up PSG Lessons @
http://www.youtube.com/user/johnnyupok |
|
|
|
Jerry Roller
From:
Van Buren, Arkansas USA
|
Posted 27 Apr 2012 10:49 am
|
|
Yeah, send me some photos. rollermusic@cox.net
I could help if you want to put MCI cranks back on it with the pull rods that use "O" rings to retain the rods in the cranks.
Jerry |
|
|
|
Jerry Roller
From:
Van Buren, Arkansas USA
|
Posted 1 May 2012 2:12 pm
|
|
Mike, I can't locate your personal email address. I mailed the rods to you today.
Thanks,
Jerry |
|
|
|
John Shadid
From:
Oklahoma City, OK
|
|
|
|
