| Author |
Topic: Zum Steel brelcranks & pull rods |
Gianni Gori
From:
Livorno, Italy
|
Posted 13 Jun 2011 12:55 am |
|
Hi guys,
I'd need 2 or 3 bellcranks and 3 or 4 pull rods for my '81 Zum Steel.
The bellcranks I need are just like the ones in this picture,
the pull rods must have the small roll spring pin at one end.
No particular requirement for their lenght, I will cut and thread them to fit.
Overseas shipment required (Italy), prompt PayPal payment.
Thanks 
_________________
Gianni
Zum D-10 9x8, MSA S-10 4x5, Quilter Steelaire combo, Peavey Nashville 112 (w/Ken Fox mod & Jensen Neo), Hilton volume pedals, Sarno Tonic Preamp, Lexicon MPX-1 |
|
|
 |
Tony Glassman
From:
The Great Northwest
|
Posted 13 Jun 2011 7:16 am
|
|
| Bruce no longer sells the old bell-cranks or pull rods to my knowledge. However,the new style cranks and rods will do the job (if you don't mind the aesthetics). |
|
|
|
Jerry Roller
From:
Van Buren, Arkansas USA
|
Posted 13 Jun 2011 8:28 am
|
|
Gianni, I have at least one of those bellcranks and may have two of them. I will check to see. I have made the rods before and could make them for you if you don't find any. Let me know if I can help you.
Jerry |
|
|
|
CrowBear Schmitt
From:
Ariege, - PairO'knees, - France
|
Posted 13 Jun 2011 8:55 am
|
|
Gianni, Tony is right, Bruce does'nt have those anymore
his new ones do fit fine
if Jerry has them go for it
he's good people, i've gotten stuff many a times from him |
|
|
|
Jerry Roller
From:
Van Buren, Arkansas USA
|
Posted 13 Jun 2011 7:41 pm
|
|
Gianni, I found only 1 Zum bellcrank. I can make whatever number of the rods and mail them with the bellcrank. Hopefully, someone else can come up with another bellcrank or 2.
Jerry |
|
|
|
Gianni Gori
From:
Livorno, Italy
|
Posted 13 Jun 2011 10:39 pm
|
|
PM sent, thanks!
_________________
Gianni
Zum D-10 9x8, MSA S-10 4x5, Quilter Steelaire combo, Peavey Nashville 112 (w/Ken Fox mod & Jensen Neo), Hilton volume pedals, Sarno Tonic Preamp, Lexicon MPX-1 |
|
|
|
