| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic c6th on e9th....help!
Reply to topic
Author Topic:  c6th on e9th....help!
Steve Wood


From:
Kitchener, Ontario, Canada
Post  Posted 17 Sep 2009 10:04 pm    
Reply with quote

folks,
I had a gig tonight and it wound up turning into a real swing jam...I was LOST.
I can noodle a little dropping my Es, etc., but is there a chord chart out there for jazz chords on an E9th neck so I can start making some sense of this?
thanks!
s.
View user's profile Send private message Send e-mail
Rick Schmidt


From:
Prescott AZ, USA
Post  Posted 17 Sep 2009 11:39 pm    
Reply with quote

Almost more important than getting hung up on the E's lowering, start exploring chords using the 9th string.
View user's profile Send private message Send e-mail
CrowBear Schmitt


From:
Ariege, - PairO'knees, - France
Post  Posted 18 Sep 2009 1:17 am    
Reply with quote

Steve,pedals A&B are also good for 6th chords
along w: the 9th string lower if you have it

as Rick mentions : use the 9th string
you have it as the root 2 frets up (1 whole step) from the 0 position
example : fret 2 root E on string 9 & strings 9 7 6 w: pedal B & 5
add pedal A & you've got a Emaj7

Buddy Emmons put out a E9 chord dictionary available here on Fo'

http://pedalsteelmusic.com/instruction/buddyemmons.html#be02
DougJernigan put out a neat course called : " Swingin' E9th"
i don't know if it's still available

Good luck on yer venture Steve
View user's profile Send private message Send e-mail Visit poster's website
Micky Byrne


From:
United Kingdom (deceased)
Post  Posted 18 Sep 2009 1:17 am     Re: c6th on e9th....help!
Reply with quote

Steve, lots can be done on just lowering the E's but that "D" note does get in the way on strums from your 10th. I don't have the "D" anymore as I changed to a universal 12 in 1981, but as Rick said experiment more on the E9th, I was finding some nice "Jazz" chords on various grips long before I decided to go universal.

Micky Byrne United Kingdom
View user's profile Send private message Send e-mail
Micky Byrne


From:
United Kingdom (deceased)
Post  Posted 18 Sep 2009 1:25 am    
Reply with quote

CrowBear how are you? I remember in one edition of "Steel guitarist" Magazine, still obtainable from Tom Bradshaw, Jeff Newman did an article called "The swinging E9th" ...I learned alot from that. Steve, perhaps you can contact Tom and ask which edition it was in and order that book.Yes and as Crowbear said...A+B down and you have A6th...so a good choice there too.

Micky Byrne United Kingdom
View user's profile Send private message Send e-mail
Rick Winfield


From:
Pickin' beneath the Palmettos
Post  Posted 18 Sep 2009 2:26 am     Herb Steiner
Reply with quote

don't forget Herb Steiner's, "Swingin' on E9th." Lotsa familiar tunes to practice, with which gives you plenty of room to explore and expand upon.
thanks Herb,
Rick


Last edited by Rick Winfield on 18 Sep 2009 3:44 am; edited 1 time in total
View user's profile Send private message Send e-mail
John Roche


From:
England
Post  Posted 18 Sep 2009 3:26 am    
Reply with quote

Another way is to use the minors, Am for C-- Em for G
and so on.
View user's profile Send private message Send e-mail
Bob Hickish


From:
Port Ludlow, Washington, USA, R.I.P.
Post  Posted 18 Sep 2009 3:38 am    
Reply with quote

Steve
take a look at this from Forum member Jody Cameron

http://www.metacafe.com/watch/yt-EC3OoRVPkBs/jody_cameron_heart_of_a_clown_pedal_steel_guitar_e9_c6/
View user's profile Send private message
Luke Morell

 

From:
Ramsey Illinois, USA Hometown of Tex Williams
Post  Posted 18 Sep 2009 9:30 am    
Reply with quote

Don E. Curtis has a course out for this. I have it, it's a good course. Go to www.scottysmusic.com.
View user's profile Send private message Send e-mail
Marc Jenkins


From:
Victoria, British Columbia, Canada
Post  Posted 18 Sep 2009 10:06 am    
Reply with quote

Doug Jernigan has a course as well. I like it! It's available here on the forum.
View user's profile Send private message Send e-mail
Jim Robbins

 

From:
Ontario, Canada
Post  Posted 18 Sep 2009 10:13 am    
Reply with quote

What John Roche said, then when you want a 7th sound slide down 2 frets. Am gives you characteristic notes of a C6 chord, Gm gives you some characteristic notes of a C9 chord.

It's really more about feel than playing the cool chords (although the cool chords are fun).
View user's profile Send private message
Steve Wood


From:
Kitchener, Ontario, Canada
Post  Posted 18 Sep 2009 10:24 pm     Thanks!
Reply with quote

thanks all for your help...lots to get me going...
steve
View user's profile Send private message Send e-mail
Matthew Prouty


From:
Warsaw, Poland
Post  Posted 19 Sep 2009 1:41 am    
Reply with quote

I always refer back to this. Here are most of the chord positions you will need. The addition to this in my playing is the A&B and the funny little lever that lowers the D to C# (you call it what you want). This will get you so much of the C6th stuff.

http://users.interlinks.net/rebel/steel/allmyexs.html

From here you can see that you are missing 8, 6, and 4, they are all there chord wise somewhere. The 4 pedal I imitate with the A pedal -2, which gives you a bluesy/rock pentatonic sound. You can almost get that C6th bend sound on the blues scale with it.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron