| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Formica covered steels look cheap and ugly
Goto page 1, 2, 3 ... 11, 12, 13  Next
Reply to topic
Author Topic:  Formica covered steels look cheap and ugly
richard burton


From:
Britain
Post  Posted 13 Dec 2008 12:21 am    
Reply with quote

I hate the look of steels clad in formica, it's just an easy short-cut for manufacturers.

Let's get back to more laquer finishes.
View user's profile Send private message Send e-mail
Rick Schmidt


From:
Prescott AZ, USA
Post  Posted 13 Dec 2008 12:57 am    
Reply with quote

Why?
View user's profile Send private message Send e-mail
Mike Perlowin


From:
Los Angeles CA
Post  Posted 13 Dec 2008 1:01 am    
Reply with quote

Rick Schmidt wrote:
Why?


Because.
_________________
Please visit my web site and Soundcloud page and listen to the music posted there.
http://www.mikeperlowin.com http://soundcloud.com/mike-perlowin
View user's profile Send private message Send e-mail Visit poster's website
Ron !

 

Post  Posted 13 Dec 2008 1:09 am    
Reply with quote

Hmmmm....never looked at it that way.Formica has higher resistance against bar nicks, smoke damage, discolorations etc etc.
I don't think that it should be looked at as an easy short-cut for manufacturers.
Pretty darn smart would be my word.Laughing
View user's profile Send private message
Rick Schmidt


From:
Prescott AZ, USA
Post  Posted 13 Dec 2008 1:23 am    
Reply with quote

Mike Perlowin wrote:

Because.


Point well taken Mike!
View user's profile Send private message Send e-mail
Michael Johnstone


From:
Sylmar,Ca. USA
Post  Posted 13 Dec 2008 1:40 am    
Reply with quote

My first few guitars were wood and I loved them but my last 2 were black mica. It seems to withstand the slings and arrows of outragous misfortune a lot better.As far as mica generally looking cheesy,I think black and a few "woodgrain" type colors like rosewood,birdseye maple look OK and I've seen a couple of very nice two tone Zums,Carters etc. I saw some mica samples that Mitsuo Fuji offers on his Excels and he has a glossy butterscotch mica the exact color of an old Stringmaster which I would have if I ever got another Excel. I just can't stand the fire engine red,tele-tubby purple,bright white and a few other colors that some people actually allow themselves to be seen sitting behind. Why not go all out and make one with that late 50s white countertop with the gold flecks and little boomerang motifs.
View user's profile Send private message Send e-mail
Cartwright Thompson


Post  Posted 13 Dec 2008 1:51 am    
Reply with quote

It's been done (awesome looking guitar Stu)
View user's profile Send private message
richard burton


From:
Britain
Post  Posted 13 Dec 2008 2:00 am    
Reply with quote

I rest my case
View user's profile Send private message Send e-mail
Barry Gaskell

 

From:
Cheshire, UK
Post  Posted 13 Dec 2008 2:44 am    
Reply with quote

Hi Guys
Chacun a son gout.
Barry
View user's profile Send private message Send e-mail
richard burton


From:
Britain
Post  Posted 13 Dec 2008 2:58 am    
Reply with quote

Il ne faut pas chercher midi à quatorze heures Very Happy
View user's profile Send private message Send e-mail
Ken Byng


From:
Southampton, England
Post  Posted 13 Dec 2008 3:23 am    
Reply with quote

The classic Emmons black mica with alloy strips looks classy to me. However, I also think that a great piece of flamed or birdseye maple is hard to beat.
_________________
Show Pro D10 - amber (8+6), MSA D10 Legend XL Signature - redburst (9+6), Sho-Bud Pro 111 Custom (8+6), Emmons black Push-Pull D10 (8+5), Zum D10 (8x8), Hudson pedal resonator. Telonics TCA-500, Webb 614-E,
View user's profile Send private message Send e-mail
Don Brown, Sr.

 

From:
New Jersey
Post  Posted 13 Dec 2008 3:38 am    
Reply with quote

Gosh Richard, This is a fine time to tell me now, after I just bought a (real purdy) D10 Black Mica.. Laughing
View user's profile Send private message
Howard Tate


From:
Leesville, Louisiana, USA, R.I.P.
Post  Posted 13 Dec 2008 3:56 am    
Reply with quote

I guess I have no taste then, I love my beautiful blue mica Mullen. Maybe you'll never have to look at it.
View user's profile Send private message Send e-mail Visit poster's website
Ken Byng


From:
Southampton, England
Post  Posted 13 Dec 2008 4:03 am    
Reply with quote

La beauté est dans l'oeil du spectateur !!
_________________
Show Pro D10 - amber (8+6), MSA D10 Legend XL Signature - redburst (9+6), Sho-Bud Pro 111 Custom (8+6), Emmons black Push-Pull D10 (8+5), Zum D10 (8x8), Hudson pedal resonator. Telonics TCA-500, Webb 614-E,
View user's profile Send private message Send e-mail
Mike Perlowin


From:
Los Angeles CA
Post  Posted 13 Dec 2008 4:16 am    
Reply with quote

Two words:

CARBON FIBER Mr. Green
_________________
Please visit my web site and Soundcloud page and listen to the music posted there.
http://www.mikeperlowin.com http://soundcloud.com/mike-perlowin
View user's profile Send private message Send e-mail Visit poster's website
John Drury


From:
Gallatin, Tn USA
Post  Posted 13 Dec 2008 4:16 am     Re: Formica covered steels look cheap and ugly
Reply with quote

richard burton wrote:
I hate the look of steels clad in formica, it's just an easy short-cut for manufacturers.

Let's get back to more laquer finishes.


Beauty is in the eyes of the barholder.


Richard,

Here is the problem, and this has been well documented here, the only guitars that deliver any serious tone at all are the black ones.

So if you have a guitar laquered in jet black who is going to be able to tell wether it is clad in mica or not?

But thanks so much for playing!
_________________
John Drury
NTSGA #3

"Practice cures most tone issues" ~ John Suhr


Last edited by John Drury on 13 Dec 2008 4:26 am; edited 1 time in total
View user's profile Send private message Send e-mail
Sam Lewis


From:
Conway, Arkansas, USA
Post  Posted 13 Dec 2008 4:17 am    
Reply with quote

Right on, Howard. I don't believe I'll play my great Mullen RP in Britin - might offend Richard.
_________________
SL D-10, SL U-12,SL SD-10, Custom Tele w/B bender, Steel King, TC300 Effects, Goodrich H-10K pedal, Fender V/T Pedal, Hilton Pedal Elite seat.
View user's profile Send private message Send e-mail
richard burton


From:
Britain
Post  Posted 13 Dec 2008 4:37 am    
Reply with quote

The pedal steel will always be an inherently bland-looking instrument, due to the fact that it is essentially a plank of wood with some strings on it.

To compound this blandness by covering it in formica is an aesthetic crime, in my opinion.
View user's profile Send private message Send e-mail
Bo Legg


Post  Posted 13 Dec 2008 5:33 am    
Reply with quote

I think I'm going to replace my counter tops with the same Formica I have on my PSG which is the same as my neighbors counter tops.
Maybe I’ll just save some money and use the old counter top to make me a new steel guitar.
Maybe I'll just go to a cabinet shop and have them make me a counter top and a PSG out of the same Formica.
I think that old Fifties pearl trimmed in chrome would look great.
I think I might have an old Pearlized mica table top somewhere in storage if anybody is interested.Laughing
I remember the good old days when most PSGs were made out of just plain old Birds Eye Maple.
View user's profile Send private message
Charlie McDonald


From:
out of the blue
Post  Posted 13 Dec 2008 5:41 am    
Reply with quote

Yeah, and honi soi qui mal e cent!
View user's profile Send private message Send e-mail
Bill Ford


From:
Graniteville SC Aiken
Post  Posted 13 Dec 2008 6:12 am    
Reply with quote

As cousin Minnie Pearl so elequently put it..Beauty is skin deep.

It's the sound/tone that counts the most, right? There are some really nice mica guitars out there, personaly, I prefer wood,birdseye,flame,etc.

Bill
_________________
Bill Ford S12 CLR, S12 Lamar keyless, Misc amps&toys Sharp Covers
Steeling for Jesus now!!!
View user's profile Send private message Send e-mail
Danny Bates

 

From:
Fresno, CA. USA
Post  Posted 13 Dec 2008 6:26 am    
Reply with quote

Way to go Richard! Tell it like you see it and don't sugar-coat it. Fire away... I love it! Smile

I've owned 6 pedal steels and every one of them has been mica finished. I haven't had the pleasure to appreciate the true qualities of a "real wood finished guitar". I can look at pictures and see them in person and appreciate them for their beauty, but without ever actually having owned one, I am ignorant (not to be confused with stupid) of the true benefits of owning one.

I can tell you this. I was given a prototype 6 string electric guitar from Yamaha in the mid 70's. It had the outline of a Gibson Les Paul, but the top and back were perfectly flat and it had a rosewood formica finish.

Would you believe me if I told you that in my entire life, I have never heard a better sounding solid body guitar? It's true. Now would you believe me if I told you that I sold the guitar cheap because I thought it was ugly as hell and I was too good to be seen playing such an ugly guitar? That's true too.

BTW, It still looked brand new when I sold it. So therefore, it was also the most durable guitar I've ever owned too.

I guess my question is this... Is there a difference in the tone of a steel guitar made in mica vrs. one with a beautiful wood finish?
View user's profile Send private message Send e-mail
John Drury


From:
Gallatin, Tn USA
Post  Posted 13 Dec 2008 6:52 am    
Reply with quote

I guess my question is this... Is there a difference in the tone of a steel guitar made in mica vrs. one with a beautiful wood finish?

Are you serious?
_________________
John Drury
NTSGA #3

"Practice cures most tone issues" ~ John Suhr
View user's profile Send private message Send e-mail
Danny Bates

 

From:
Fresno, CA. USA
Post  Posted 13 Dec 2008 6:54 am    
Reply with quote

Yes
View user's profile Send private message Send e-mail
Rick Barnhart


From:
Arizona, USA
Post  Posted 13 Dec 2008 7:08 am    
Reply with quote

John Drury Wrote,

"Beauty is in the eyes of the barholder."

This should be the SGF Quote of the year! Laughing
_________________
Clinesmith consoles D-8/6 5 pedal, D-8 3 pedal & A25 Frypan, Pettingill Teardrop, & P8 Deluxe.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron