| Author |
Topic: help/ knee lever adjustment |
Lee Bartram
From:
Sparta, Kentucky, USA
|
Posted 19 May 2008 3:58 am |
|
i always get this confused ,i want to make the lever that lowers my E's have a short travel(really short if possible )do i move the rods closer to the body of my stell and then adjust the lever itself or do i move them farther away from the body and adjust the lever travel? my Mullen has a really short travel like this and i want my williams to do the same.thanks in advance for any help you can oaffer.
d |
|
|
 |
Jim Palenscar
From:
Oceanside, Calif, USA
|
Posted 19 May 2008 5:26 am
|
|
| Further from the body on the bellcranks, closer to the body on the changer for a shorter but stiffer throw. |
|
|
|
Dale Hansen
From:
Hendersonville,Tennessee, (USA)
|
Posted 19 May 2008 5:30 am
|
|
Lee,
You're sure to get some good, competent help here from the guys on the forum. Unfortunately, I'm running behind this morning, and gotta get going. If, by chance, you don't get all the help you need here today, you can drop me a line, call me, or even bring it over this weekend if it's not too far for you.
DH
(615) 618 0776 |
|
|
|
Daniel J. Cormier
From:
Lake Charles, LA, USA
|
Posted 19 May 2008 6:02 am
|
|
Jim's right on the money.you can have short travel , But you have to be willing to put up with a stiff lever feel.
_________________
Daniel J. Cormier
Rittenberry with Tone to the bone,profex or tubefex and what ever amp, hilton pedal, BJS bars. Email at kajunsteelman@yahoo.com. |
|
|
|
