| Author |
Topic: Replacement Pots for a MSA |
Mike Poholsky
From:
Kansas, USA
|
Posted 14 May 2008 6:37 am |
|
Anyone know what the replacement pots would be for a '70s MSA? Also where I could get them. I've got 4 on mine. Guitar Vol & Tone, and Fuzztone Gain & Tone. Are they all the same?
_________________
Zumsteel 12 Universal
SGBB
ShoBud VP
'64 Fender Twin Reverb/Fox Rehab
Fender Steel King w/BW 1501-4
FX to Taste |
|
|
 |
Donny Hinson
From:
Glen Burnie, Md. U.S.A.
|
Posted 15 May 2008 1:31 pm
|
|
| For the guitar, you definitely want a 500k audio taper volume pot, and a 250k linear tone pot. I'm not sure about the values of the two pots for the distortion unit, but I'm certain 100k pots will suffice there. |
|
|
|
Mike Poholsky
From:
Kansas, USA
|
Posted 15 May 2008 6:26 pm
|
|
Thanks Donny.
_________________
Zumsteel 12 Universal
SGBB
ShoBud VP
'64 Fender Twin Reverb/Fox Rehab
Fender Steel King w/BW 1501-4
FX to Taste |
|
|
|
John Billings
From:
Ohio, USA
|
Posted 16 May 2008 1:31 pm
|
|
| Have you pulled the pots? Often the value is stamped on the pot. If the value isn't on the parts, googling the manufacturer and the part number should work. If you have a VOM, you can measure them, unless they're toast. |
|
|
|
