| Author |
Topic: Canadian 500K pots log taper pots |
Bill Myers
From:
Camp Hill, Pennsylvania, USA
|
Posted 15 Nov 2005 3:09 pm |
|
I have found out that a large electronics parts house in my area can get the 500k log taper pots for in your pot pedals. If I buy 25 I can get them for a little bit better price. I just put on in my goodrich and they are nice pots. Built very well. If I can get 25 sold I can get them out to you for $20 shipped. Please let me know and I will keep a list and if I get enough sold, I'll put in the order. They have a few on hand and I bought one to try it, they are nice.
Bill
------------------
2003 Carter D10, 9x5 Black and 1998 Carter D10 9x5, Evans Amp
|
|
|
 |
Jim Saunders
From:
Houston, Texas, U.S.A.
|
Posted 15 Nov 2005 3:30 pm
|
|
I'll take one and if the price is right, two.
O.K., two for me.------------------
Mullen, Royal Precision, D10, Peavey Nashville 112, Peavey Nashville 400, Profex II, Korg DTR1000, Goodrich L120 VP.
[This message was edited by Jim Saunders on 15 November 2005 at 04:53 PM.] |
|
|
|
Dean Thompson
From:
Indianola, Iowa, USA
|
Posted 15 Nov 2005 3:42 pm
|
|
Bill, you can put me down for one also.
------------------
|
|
|
|
Bill Myers
From:
Camp Hill, Pennsylvania, USA
|
Posted 15 Nov 2005 4:16 pm
|
|
The price is going to be $20 shipped via first class mail.
Bill
------------------
2003 Carter D10, 9x5 Black and 1998 Carter D10 9x5, Evans Amp
[This message was edited by Bill Myers on 15 November 2005 at 04:17 PM.] |
|
|
|
Larry D Adams
From:
Northern Maine & Western New Brunswick, CA
|
Posted 15 Nov 2005 4:47 pm
|
|
I would like to be put down for one.
Thanks, Larry |
|
|
|
Jon Light
From:
Saugerties, NY
|
Posted 15 Nov 2005 4:55 pm
|
|
I would be in for one, provided I could get some expert confirmation that these are heavy duty pots with the proper taper. I only say this because there has been some contradictory reporting on just exactly what is the correct pot for VPs, leaving me a tad confused.
edited to acknowledge that you wrote that you tried one and liked it---so you are satisfied with the taper?[This message was edited by Jon Light on 15 November 2005 at 04:56 PM.] |
|
|
|
Bill Myers
From:
Camp Hill, Pennsylvania, USA
|
Posted 15 Nov 2005 5:33 pm
|
|
I put one in a goodrich 120 tonight that had a worn out pot in it. After I adjusted it, it felt fine and sounded good. To look at the pot, it is made in the same manner as the Allen Bradley or the Clarostat. It is a 500k log taper pot. It is going to be the same as an Allen Bradley pot? I don't know. There is only one Canadian company, making heavy duty pots like this. And after all....we are only talking about $20. It's not like I am trying to sell these to get rich off them. I found a local distributor who carrys them and I am trying to pass them on at a reasonable price.
------------------
2003 Carter D10, 9x5 Black and 1998 Carter D10 9x5, Evans Amp
[This message was edited by Bill Myers on 15 November 2005 at 05:33 PM.] |
|
|
|
Harold Williamson
From:
Kermit, West Virginia, USA (deceased)
|
Posted 15 Nov 2005 7:00 pm
|
|
| I'll take one. |
|
|
|
steve takacs
From:
beijing, china via pittsburgh (deceased)
|
Posted 15 Nov 2005 8:04 pm
|
|
| Great stuff, please put me down for TWO pots and I will have them sent to my North Dakota address...will send later with the dough. Thanks, steve t |
|
|
|
Bill Myers
From:
Camp Hill, Pennsylvania, USA
|
Posted 16 Nov 2005 2:41 pm
|
|
Someone said that I should put this info in. A logarithmic taper is the same thing as an audio taper which is what volume pedals use. The linear taper is not what you want for a volume pedal.
Bill
------------------
2003 Carter D10, 9x5 Black and 1998 Carter D10 9x5, Evans Amp
|
|
|
|
Jon Light
From:
Saugerties, NY
|
Posted 16 Nov 2005 2:56 pm
|
|
| Didn't mean to sound picky--like I said, there has been some confusion on this forum about just exactly what is the correct taper. I was just looking for confirmation that this is the right one. |
|
|
|
Wiz Feinberg
From:
Mid-Michigan, USA
|
Posted 16 Nov 2005 2:57 pm
|
|
Bill;
Please put me down for one also.
------------------
Bob "Wiz" Feinberg
Moderator of the SGF Computers Forum
Visit my Wiztunes Steel Guitar website at: http://www.wiztunes.com/
or my computer troubleshooting website: Wizcrafts Computer Services
[This message was edited by Wiz Feinberg on 16 November 2005 at 02:58 PM.] |
|
|
|
Bill Myers
From:
Camp Hill, Pennsylvania, USA
|
Posted 16 Nov 2005 3:48 pm
|
|
Jon,
You're not being picky at all. If you search log taper on the electronics section, there is some intresting information on this subject. (the forum always has great info as a resource). The term audio taper and log taper refer to the fact that human hearing hears volume increases in a logrithmic manner as oppose to a linear increase. This is why audio devices (volume pedals included) use log taper of audio taper pots (log=audio). I found this very intresting.
------------------
2003 Carter D10, 9x5 Black and 1998 Carter D10 9x5, Evans Amp
|
|
|
|
Jon Light
From:
Saugerties, NY
|
Posted 16 Nov 2005 4:06 pm
|
|
| There were some differences of opinion about terminology that left me a bit confused. But no matter. If you do this, count me in for one. |
|
|
|
Harold Williamson
From:
Kermit, West Virginia, USA (deceased)
|
Posted 16 Nov 2005 4:19 pm
|
|
| Put me down for 2 instead of 1. Buddy needs one also. |
|
|
|
Jon Jaffe
From:
Austin, Texas
|
Posted 17 Nov 2005 6:39 am
|
|
| I take 2! |
|
|
|
Andrew Buhler
From:
Maryland, USA
|
Posted 17 Nov 2005 8:18 am
|
|
| I'd like one as well. Sending email. |
|
|
|
Dan Chroninger
From:
Blackriver Falls, Wisconson, USA
|
Posted 17 Nov 2005 10:12 am
|
|
I'll take one Dan Chroninger
19633 Idyllic Rd
Sparta Wi 54656 |
|
|
|
KENNY KRUPNICK
From:
Columbus, Ohio
|
Posted 17 Nov 2005 10:33 am
|
|
I'll take one. 
E-mail me the address to send a money order,and the amount.
Thanks. |
|
|
|
Jon Zimmerman
From:
California, USA
|
Posted 18 Nov 2005 9:02 am
|
|
Bill, I'll put a M/O in the mail for you ASAP for 2. Just Email your addr. and amount needed.
Thanks! JZ
|
|
|
|
T. C. Furlong
From:
Lake County, Illinois, USA
|
Posted 18 Nov 2005 2:34 pm
|
|
If I have counted the responses correctly, the total is at about 16 commitments for pots. Please add one for me and that makes 17. Only 8 more (minus what Bill will need) to go
Thanks,
TC |
|
|
|
John Daugherty
From:
Rolla, Missouri, USA
|
Posted 18 Nov 2005 4:39 pm
|
|
Bill, Do you take Paypal? I costs me more than $20 to take off work and drive to get a money order.
If you take paypal, I could buy 2 pots.
------------------
www.phelpscountychoppers.com/steelguitar
|
|
|
|
Jim Saunders
From:
Houston, Texas, U.S.A.
|
Posted 18 Nov 2005 4:42 pm
|
|
| I would encourage others who want just one to go for two. Use can always use them down the road. |
|
|
|
Kevin Mincke
From:
Farmington, MN (Twin Cities-South Metro) USA
|
Posted 18 Nov 2005 10:35 pm
|
|
Bill, are these the PEC pots? If so, this is what I have found for a replacement pot and have purchased extras from a supplier in Minnesota.
If Bill runs out I will sell them for the same price. |
|
|
|
Bill Myers
From:
Camp Hill, Pennsylvania, USA
|
Posted 13 Dec 2005 2:13 pm
|
|
Just an update...I have about 5 of these left...If you want one let me know.
Bill
------------------
2003 Carter D10, 9x5 Black and 1998 Carter D10 9x5, Evans Amp
|
|
|
|
