Author |
Topic: Mosvalve Power Amp - 80 Watts Per Channel |
Darvin Willhoite
From: Roxton, Tx. USA
|
Posted 17 Jun 2004 6:24 am
|
|
This is a two space rack mounted stereo power amp conservatively rated at 80 watts per channel, but this thing is loud. It has front mounted level and presence controls for each channel and gives you a very close approximation of a tube amp sound. There are a few scratches from normal use, and the cooling fan is a little noisy for studio use, but it would not be noticeable if mounted in a rack. The power cable has been shortened to about 18" long for rack mounting. I just replaced a couple of faulty resistors and cleaned the jacks and controls. It works great, price is $200, SHIPPING INCLUDED in the USA.
------------------
Darvin Willhoite
Riva Ridge Recording
|
|
|
|
Kevin Mincke
From: Farmington, MN (Twin Cities-South Metro) USA
|
Posted 17 Jun 2004 7:19 pm
|
|
These are great amps for a steel rack setup. It is similar to the Mosvalve 1160 which is also 80W per side vs. the Mosvalve 1500 250/side. Great, clean power! |
|
|
|
Darvin Willhoite
From: Roxton, Tx. USA
|
Posted 18 Jun 2004 2:37 pm
|
|
Bump |
|
|
|
John Russell
From: Austin, Texas
|
Posted 18 Jun 2004 7:17 pm
|
|
Can it be wired up bridged mono? What would the output be into a single 8 ohm speaker?
--JR |
|
|
|
Darvin Willhoite
From: Roxton, Tx. USA
|
Posted 23 Jun 2004 4:27 am
|
|
Sold |
|
|
|