fender lap..pots and cap

Chuckie Acevedo · From: Fresno Ca

Where and what size do I need to install to two tele pickups,,,like to keep it original if possible.Guitar is a /Fender deluxe

------------------
Chuckieboy
Sho-Bud Prolll
Fenders Deluxe6,CD8 C3,D10

Brad Bechtel · From: San Francisco, CA

Try asking this on the Seymour Duncan forums. I don't know myself.

Michael Brebes · From: Northridge CA

On Fender guitars of all types, the standard is 250K pots and .05mFd caps. I usually find that I like the response of a .02 cap better, but that's me.

Tim Whitlock · From: Colorado, USA

Michael - Curious...how does changing to a .02 mf cap affect the tone control? I'm replacing the pot and cap on my Fender 1000 tone control. I only ever use it to get the doo-wah effect. Thanks - Tim

John Tipka · From: Reynoldsburg,OH

Single coil Telecaster pickups and other single coil (basses, mandolins, etc.) pickups use 250K audio taper volume and tone controls with .05 mfd tone capacitors.

Humbuckers (double coil) use 500K audio taper potentiometers for both volume and tone controls and .02 mfd tone capacitors.

Stringmaster guitars use 250K audio taper pots for the volume and mixer controls and a 1 megohm linear taper pot for the tone control. The Stringmaster tone cap is .05 mfd (paper).

[This message was edited by John Tipka on 02 April 2004 at 08:18 AM.]

Chuckie Acevedo · From: Fresno Ca

Thanks guys!! John somehow Ive lost your email address could yousend it to me via email.

------------------
Chuckieboy
Sho-Bud Prolll
Fenders Deluxe6,CD8 C3,D10

Forum Index > Steel Without Pedals		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: