| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Magnatone T-8
Reply to topic
Author Topic:  Magnatone T-8
Jeff Strouse


From:
Jacksonville, Florida, USA
Post  Posted 14 Mar 2004 2:18 pm    
Reply with quote



Here's a pic of my Magnatone Maestro T-8 (I hope)!

Bear with me...it's my first attempt at playing with this FTP stuff, and I must say it's been a frustrating, all afternoon affair so far!

I hope it works!

[This message was edited by Jeff Strouse on 14 March 2004 at 02:19 PM.]

[This message was edited by Jeff Strouse on 14 March 2004 at 02:30 PM.]

[This message was edited by Jeff Strouse on 14 March 2004 at 02:40 PM.]

[This message was edited by Jeff Strouse on 14 March 2004 at 02:40 PM.]

View user's profile Send private message Send e-mail
Jeff Strouse


From:
Jacksonville, Florida, USA
Post  Posted 14 Mar 2004 2:20 pm    
Reply with quote

Well, at first it was waaaaaay too darn big!!! I downloaded "Irfanview" and reduced the size to 640 W and 425 H, which is 816054 bytes.

Let me know if it's still too big where it distorts the post size on your computer screen. It looks okay on mine now...

[This message was edited by Jeff Strouse on 14 March 2004 at 02:36 PM.]

View user's profile Send private message Send e-mail
C. Brattain


From:
Balch Springs, Texas, usa
Post  Posted 14 Mar 2004 2:43 pm    
Reply with quote

Looks great, very clean, Chuck
View user's profile Send private message Send e-mail Visit poster's website
Jay Fagerlie


From:
Lotus, California, USA
Post  Posted 14 Mar 2004 5:59 pm    
Reply with quote

Jeff,
Is that a Maestro? It looks like a Lyric, I may be wrong.
Regardless what it is, is sure is nice.
Here's my Maggie, I thought it was a Maestro.
Sometimes I haave the hardest time figuring out what these things really are..... http://www.scaryoak.com/jay/mag.jpg


Jay

[This message was edited by Jay Fagerlie on 14 March 2004 at 06:08 PM.]

[This message was edited by Jay Fagerlie on 14 March 2004 at 06:16 PM.]

View user's profile Send private message Send e-mail Visit poster's website
Michael Lee Allen

 

From:
Portage Park / Irving Park, Chicago, Illinois
Post  Posted 14 Mar 2004 6:23 pm    
Reply with quote

REMOVED

Last edited by Michael Lee Allen on 28 Feb 2011 7:10 pm; edited 1 time in total
View user's profile Send private message Send e-mail
Jeff Strouse


From:
Jacksonville, Florida, USA
Post  Posted 14 Mar 2004 6:31 pm    
Reply with quote

Very nice, Jay! I've never seen one quite like that.

Mine is definitley a Maestro...the writing on each neck after the 24 fret reads, "Magnatone Maestro." From my understanding the Double Necks were Lyrics, and the Triples were Maestros. I'd sure like to find out more about the history of Magnatones as it relates to the multi-neck steels. They were in business from the 30's thru the 60's I believe, under various names. There were a lot of different models.

There's quite a bit of space between each neck on mine. Playing that third neck for any lenghth of time puts a strain on the old back. The four neck models must have been really been a stretch! I've never seen one, but I think Keoki Lake owned one at one time.

Barney Isaacs played a Double Neck for many years on the old Hawaii Calls show. I think Magnatone supplied the players with steels.
View user's profile Send private message Send e-mail
Jay Fagerlie


From:
Lotus, California, USA
Post  Posted 14 Mar 2004 7:13 pm    
Reply with quote

Thanks Jeff.
Have you dated yours?
I checked the pots on mine during a re-string and it seems to be a 1955.
The volume control is normal, the tone control doubles as a mixer for the two pickups (I am assuming like a Stringmaster blend control)
Adjustable legs (4), the necks are staggered enough to be able to play it without catching the ol' buttons....but man is it heavy!
If I remember correctly, it's 56 lbs in the case. My back hurts just thinkin' about it!
What tunings do you have on yours? On mine near to far is A6, C6, and E13....I don't play the A6th as much as the other two, so I've been thinking of trying a new tuning on it.
So many toys, so little time!

Jay
View user's profile Send private message Send e-mail Visit poster's website
Jeff Strouse


From:
Jacksonville, Florida, USA
Post  Posted 14 Mar 2004 7:25 pm    
Reply with quote

I use those same tunings. A6th (Closest neck), E13 (Middle), and C6th (outer). But I don't get out to the C6th neck much.

I haven't tried to date it before...I'm not sure what to take apart to check. But, there is a serial number on the bottom: #42420.

In case anyone is interested, it's a short scale neck, with a string spacing of appox 11/32 at the nut, and 7/16 at the bridge. I say approx, because they were evidently filed by hand, so the grooves aren't exact like a machinist would have made them.
View user's profile Send private message Send e-mail
Keith Grubb

 

From:
Petaluma, CA, USA
Post  Posted 14 Mar 2004 9:12 pm    
Reply with quote

Hi Jeff,

My Magnatone looks very similar to yours. I need to get the tuning machines worked on. Two broke on me a couple of years and it cost about $80 to fix. So now anytime I change strings or tunings I cringe because I know I'll break another one soon.

My Magnatone has four-on-a-side tuners. Are these made any more? I was hoping to swap out all of the tuners with new ones, but I'm afraid that will cost quite a bit. By the way my guitar weighs about 50 pounds in the case.

Keith
View user's profile Send private message Send e-mail
Jeff Strouse


From:
Jacksonville, Florida, USA
Post  Posted 14 Mar 2004 9:22 pm    
Reply with quote

I think the 60's were the end of the line for Magnatones (at least I've never seen or heard of any from the 70's). You might contact Bobbe Seymour to see if he possibly knows where you could find some parts off of a "dead" Magnatone. That's the problem with these vintage instruments....no new parts!
View user's profile Send private message Send e-mail
George Keoki Lake


From:
Edmonton, AB., Canada
Post  Posted 14 Mar 2004 9:30 pm    
Reply with quote

That triple brings back fond memories of the quad (4) I once owned and foolishly sold. It was just too darned heavy to lug around especially in the heavy case. Today, I think it might be considered as a rare bird. It also had separate vol and tone controls for each neck.
Yes, Magnatone did indeed give the steel guitarists on "Hawai'i Calls" their instruments back in the fifties. When that happened, Webley Edwards would give the best world-wide plug a company like Magnatone could ever desire..."Alvin Isaacs and his Magnatone Steel Guitar". Jules Ah See also had a Magnatone which, in later years was acquired by Alan Akaka. Jules had his name painted in bold letters on the case. Whether or not Alan still has it, I have no idea. It too, would be a rare bird for anyone to own knowing it was played by Jules.
View user's profile Send private message
Jeff Strouse


From:
Jacksonville, Florida, USA
Post  Posted 14 Mar 2004 9:35 pm    
Reply with quote

Aloha, Keoki!

Please email me when you get a chance. I have a question for 'ya...

View user's profile Send private message Send e-mail
Rick Aiello


From:
Berryville, VA USA
Post  Posted 15 Mar 2004 5:16 am    
Reply with quote

Here's my Lyric. It has these wild "wood humbucker-like" pickups under those handrests ...



I got it for $125 back in '88 ... very lovely tone

------------------

www.horseshoemagnets.com

[This message was edited by Rick Aiello on 15 March 2004 at 08:21 AM.]

View user's profile Send private message Send e-mail Visit poster's website
Keith Grubb

 

From:
Petaluma, CA, USA
Post  Posted 15 Mar 2004 10:26 am    
Reply with quote

Hey Guys,

At this point I'm planning to try and do the cheapest fix for my tuning machines. I don't mind having non-stock parts. I'm taking the guitar in soon to have the tuners looked at.

I have one other question, as a stock instrument are you able to have all three necks on at once? Right now I can have Front & Middle on or Middle & Back on, but not all three.

Keith
View user's profile Send private message Send e-mail
Jeff Strouse


From:
Jacksonville, Florida, USA
Post  Posted 15 Mar 2004 10:46 am    
Reply with quote

Yes, you should be able to have all 3 on at once. Perhaps a prior owner did some funky wiring in it at one time?
View user's profile Send private message Send e-mail
Keith Grubb

 

From:
Petaluma, CA, USA
Post  Posted 15 Mar 2004 11:56 am    
Reply with quote

Yes I think a former owner did do some bad stuff to my guitar. I paid $300 for it three years ago and I ended up paying about $200 to have the middle neck rewired because someone had gone in and removed most of the wiring on that neck. How complicated would it be to have it wired so that I could have all three necks on?

I have to say it is nice to see that there are some other Magnatone owners on there.

Keith
View user's profile Send private message Send e-mail
Michael Lee Allen

 

From:
Portage Park / Irving Park, Chicago, Illinois
Post  Posted 15 Mar 2004 9:19 pm    
Reply with quote

REMOVED

Last edited by Michael Lee Allen on 28 Feb 2011 7:13 pm; edited 1 time in total
View user's profile Send private message Send e-mail
George Keoki Lake


From:
Edmonton, AB., Canada
Post  Posted 15 Mar 2004 9:59 pm    
Reply with quote

Just to let you know I did e-mail you as you requested, Jeff. Used the address in your thread.
View user's profile Send private message
Jeff Strouse


From:
Jacksonville, Florida, USA
Post  Posted 15 Mar 2004 10:12 pm    
Reply with quote

Hi Keoki -

Sorry about that...it never came through. It was probably problems with my ISP..it seems they are changing names (owners) every other day!

jeffstro@comcast.net

or

jeff287965@yahoo.com

Thanks!
View user's profile Send private message Send e-mail
Jeff Strouse


From:
Jacksonville, Florida, USA
Post  Posted 21 Mar 2004 8:33 am    
Reply with quote

A big Mahalo for your advice, Keoki! I certainly appreciate it!

View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron