| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Tunning for general playing on lap steel
Reply to topic
Author Topic:  Tunning for general playing on lap steel
Bob Bleifus

 

From:
Wildomar, California, USA
Post  Posted 28 Dec 2003 12:09 pm    
Reply with quote

I just received my new Melobar SXL Lap Steel. Now I have to learn to play it. I currently have it tuned as if it were a Dobro D,B,G,D,B,G. Is there any disadvantage to this tunning for general play. I would appreciate any comments or advice. Does recommended tunning have more to do with the style of music?
View user's profile Send private message Send e-mail
Jesse Pearson

 

From:
San Diego , CA
Post  Posted 28 Dec 2003 12:44 pm    
Reply with quote

Get Dewitt Scotts "Basic Lap Steel" for C6 tuning. It's on the Mel Bay books and comes with a CD. You need the right gauges for the strings. This C6 tuning does so much and is very easy to use once you study it. Look thru the archieves with the search button up in the upper right side of the main page, there is alot to study if you want. The C6 is great for country, Hawaiian and anything else if you learn the neck real good. Good luck...
View user's profile Send private message Send e-mail Visit poster's website
Billy Wilson

 

From:
El Cerrito, California, USA
Post  Posted 28 Dec 2003 1:14 pm    
Reply with quote

Bob, The 6th type tuning is a great way to go. Here's two that will work well with a 6 string instrument.
High to Low C6th E C A G E C
A6th E C# A F# E C#
View user's profile Send private message Send e-mail
Bob Bleifus

 

From:
Wildomar, California, USA
Post  Posted 28 Dec 2003 1:33 pm    
Reply with quote

Jesse, If I go with the C6 tunning do you know what string gauges I would need. My lap is currently strung with 016, 018, 026w, 034, 042, 056.
View user's profile Send private message Send e-mail
Steinar Gregertsen


From:
Arendal, Norway, R.I.P.
Post  Posted 28 Dec 2003 1:52 pm    
Reply with quote

John Ely has a string gauge chart here: http://www.hawaiiansteel.com/learning/gauges.html

Steinar

------------------
www.gregertsen.com


[This message was edited by Steinar Gregertsen on 28 December 2003 at 01:53 PM.]

View user's profile Send private message Send e-mail Visit poster's website
Roger Shackelton

 

From:
MINNESOTA (deceased)
Post  Posted 28 Dec 2003 2:08 pm    
Reply with quote

Hello Bob, These gauges should be correct for C-6th.

C-6th

1. E .014
2. C .017
3. A .021
4. G .024w
5. E .030w
6. C .036w

Roger
View user's profile Send private message Send e-mail
David L. Donald


From:
Koh Samui Island, Thailand
Post  Posted 28 Dec 2003 4:51 pm    
Reply with quote

Bob to answer one question, yes the disadvantage of bluegrass tuning is minors, which are a basic chord function, are very incomplete in this tuning. Yes you can play over minor chords, but you can't really play complete minors easily.

While the C6 you have minors quite easily, plus lots more.
And it's not far off from The Leavitt tuning, which is hard, but extremely powerful.

[This message was edited by David L. Donald on 28 December 2003 at 04:52 PM.]

View user's profile Send private message Send e-mail Visit poster's website
Jesse Pearson

 

From:
San Diego , CA
Post  Posted 28 Dec 2003 5:07 pm    
Reply with quote

Bob, alot of guys with 22.5" short scale necks will go to the bigger side of the possible string guage choices for a particular pitch. I do this and I get a better tone, but I have cheapo Magnatones and this gets the most out of the pick up. It sounds great to me. Dewitt Scott has lighter strings than me on his C6 fry pan because he has a long scale neck, I think? When you go to the heavy side of the guages, you have to be aware that you can't tune much higher, so alternate tunings might be affected.

C6
____
E - .016
C - .022
A - .024
G - .026
E - .032
C - .038
View user's profile Send private message Send e-mail Visit poster's website
Travis Bernhardt

 

From:
Vancouver, British Columbia, Canada
Post  Posted 28 Dec 2003 6:53 pm    
Reply with quote

If you're new to steel guitar it won't kill you to stick with the high bass G tuning you're using now (or raise it to A). You won't have a straight bar minor chord but you'll still have major and minor third intervals and slants in sixths, plus you'll have a full major chord you can move around and strum.

Nothing wrong with going to C6, I would just say that if you're a total beginner a straight high or low bass G or A tuning MIGHT be easier to learn on, at first. The logic of it is probably a little easier to grasp.

-Travis
View user's profile Send private message Send e-mail
Bill Leff


From:
Santa Cruz, CA, USA
Post  Posted 29 Dec 2003 9:58 am    
Reply with quote

Scotty's Music in St Louis makes a 6 string C6 set under their "SIT" name. They are semi-flats so reduce string squeak on the low strings. You can purchase them from Scotty's or juststrings.com (a little cheaper at the latter I think). They will work well on you Melobar.
View user's profile Send private message Send e-mail
George Rout


From:
St. Catharines, Ontario, Canada
Post  Posted 29 Dec 2003 3:28 pm    
Reply with quote

I'm glad I'm not you Bob, because you'll probably get everybody's personal preference. For 70 years, some folks, like me, have been using E C# A E A E (high to low). If you're going to play a lot by yourself, this tuning allows you to accompany yourself. If you want additional info, send an email to me. Geo
View user's profile Send private message Send e-mail Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron