| Author |
Topic: More on Stringmaster sustain |
Ron Whitfield
From:
Kaaawa, Hawaii, USA
|
Posted 21 Aug 2003 5:22 pm |
|
| A friend has done this a number of times and it always works. Replace the short screws(1") with longer screws(1 1/2") around the bridge plate. The sizes here may not be exact, so do so with care & caution. No fair cracking the wood or going thru the bottom, etc. The sustain is always increased, and a harmonic can be slid all the way to the PUs, where as it could not before. Has anyone else tried this? |
|
|
 |
Bob Snelgrove
From:
san jose, ca
|
Posted 21 Aug 2003 6:13 pm
|
|
Mahalo.
I'll try it 
bob
|
|
|
|
Rick Collins
From:
Claremont , CA USA
|
Posted 22 Aug 2003 6:36 am
|
|
Are you refering to only the four screws immediately behind the bridge, or all of the screws in the bridge plate?
Rick |
|
|
|
b0b
From:
Cloverdale, CA, USA
|
Posted 22 Aug 2003 10:41 am
|
|
| Good tip. Moved to 'No Peddlers' for further discussion. |
|
|
|
