| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Pre-War Dobro question
Reply to topic
Author Topic:  Pre-War Dobro question
Brad Sarno


From:
St. Louis, MO USA
Post  Posted 21 Nov 2002 9:50 am    
Reply with quote

I just picked up a '30s Dobro real cheap. It needed some cleaning up. The spider is a cross, not a web-shaped type. The bridge saddle in it was solid metal, steel I believe because it was rusty. This saddle is one piece and blocks the hole to the cone tension screw. Is this correct for this vintage Dobro. It's got F holes and not the round vent types. I saw a picture of Lloyd Green holding the exact same axe in my Dobro instructional book.

Thanks,
Brad Sarno
View user's profile Send private message Send e-mail Visit poster's website
Brad Sarno


From:
St. Louis, MO USA
Post  Posted 21 Nov 2002 9:51 am    
Reply with quote

By the way, it's a square neck.

Brad Sarno

View user's profile Send private message Send e-mail Visit poster's website
Mike D

 

From:
Phx, Az
Post  Posted 21 Nov 2002 12:11 pm    
Reply with quote

No the saddle has been replaced. It should have a two piece Maple saddle. Here's a pic of a Dobro Angelus I found on the web. http://members.cruzio.com/~steed/regal.htm

[This message was edited by Mike D on 21 November 2002 at 08:03 PM.]

View user's profile Send private message Send e-mail
Paul Warnik

 

From:
Illinois,USA
Post  Posted 21 Nov 2002 12:37 pm    
Reply with quote

To cut corners in production-some of the cheaper guitars came with 4-legged instead of the usual 8-legged spider
View user's profile Send private message
Brad Sarno


From:
St. Louis, MO USA
Post  Posted 21 Nov 2002 2:19 pm    
Reply with quote

Thanks for the link Mike. That's what I needed to know. Maple huh? That should be easy enough. Any opinions on keeping it stock with the 4 legged spider or would it sound better with the full spider/cone setup?

Thanks,
Brad Sarno
View user's profile Send private message Send e-mail Visit poster's website
mikey


From:
New Jersey
Post  Posted 21 Nov 2002 6:28 pm    
Reply with quote

Aloha Brad,
The 4 legged "spiders" were a depression cost cutter..my 2 cents...you can make that into a righteous sounding Dobro by contacting ResoPhonic Outfitters (Beard Guitars, the link is on the link page) and get an 8 leg spider(45.00) and new cone(quarterman 45.00)It's well worth the price...you could keep the old spider, but I'd still change the cone.( You won't believe the difference)
Mike
View user's profile Send private message Send e-mail
Mike D

 

From:
Phx, Az
Post  Posted 21 Nov 2002 8:05 pm    
Reply with quote

I'll second Mikey's suggestion. A Q-Man and good spider will really help out. Keep the old parts if you do swap them.
View user's profile Send private message Send e-mail
mikey


From:
New Jersey
Post  Posted 21 Nov 2002 11:46 pm    
Reply with quote

Oh, definitely keep the old parts, but you will also have to order 2 new bridge inserts...I like maple, but ebony capped maple will give you a brighter tone...they are cheap so I would get 2 of each and see what you prefer.
Mike
View user's profile Send private message Send e-mail
Ally

 

From:
Edinburgh, UK
Post  Posted 22 Nov 2002 3:11 am    
Reply with quote

I have a sililar instrument; f-hole resonator made for Sears in the early 30s. I , too, saw the Lloyd Green pic, and remembered that Lloyd played some great dobro on a Mike Auldridge lp : I emailed Mike, and he told me Lloyd had it professionally set up with quarterman cone and eight-leggd spider. I tried this, and while it sounded much better than stock, there was something lacking ,so I swapped out the q-man for the orginal stamped, lugged cone, and use an eight legged spider. The guitar now sounds pretty good.... especially for country stuff played in closed positions up the fretboard. Great volume, and a proper vintage tone you only get from a good stamped cone.

Al Perkins plays a similar model; I think he also had a soundwell installed.

Cheers

AC
View user's profile Send private message Send e-mail
mikey


From:
New Jersey
Post  Posted 22 Nov 2002 8:33 am    
Reply with quote

Aloha Ally,
I don't know when you swapped cones...but now, John Quarterman makes at least 5 different styles...all copied from different eras...so, I REALLY stand behind my statement of getting a Quarterman cone as opposed to using the one from a cost cutter guitar(Heck, I use them in ALL my resos except my Tri-cone which still has the originals cones made by John Dopyera)...You just have to get the correct cone for the tone you are after.( but if YOU are happy w/ your stamped cone, then that's the tone you're after...if it ain't broke, don't fix it!)but I'll tell you, I put a new cone in my 70's Dobro (OMI roundneck)...and it was real dull w/the stock cone , now it rings like a bell, loud, snappy and bright,because I used a specific style cone, for the tone I was after..I'm VERY pleased w/ it.
Aloha,
Mike
View user's profile Send private message Send e-mail
Ally

 

From:
Edinburgh, UK
Post  Posted 22 Nov 2002 8:56 am    
Reply with quote

Aloha Mikey;

I found that the stamped cone really does sound better, -(if by better I mean louder and brasher, I guess) and I like the fact that the original cone is still in there ... I'm probably wrong, but the cone seems to be such a crucial part of the tone that swapping it for a new one is akin to ripping a soapbar pickup from an old Gibson and putting in a PMG active.

PS. I boughta metal bodied pre war Model 32 dobro on ebay last week ... anyone know much about these? Heard that with the spider bridge they can sound more like tricones than single cones.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron