Author |
Topic: 2-way toggle switch |
Nate LaPointe
From: Los Angeles, California, USA
|
Posted 14 Nov 2006 3:58 pm
|
|
I have a Williams U12 steel guitar with a 2-way toggle switch that if I'm correct, changes the polarity of the pickup. Anyways, it's going bad with a short, even cut out on me during sound check and I had to tape it at just the right angle! Does anyone have one for sale or know where I can get my hands on one?
Thanks!
Nate
------------------
www.natelapointe.net
|
|
|
|
Bill Ford
From: Graniteville SC Aiken
|
Posted 15 Nov 2006 6:57 am
|
|
Any electronics store/Radio Shack will have what you need. Look at the back, and make a drawing of the number of pins, and where the wires are, and take it with you. Also measure it so you will get one that is not too large.
Bill |
|
|
|
Erv Niehaus
From: Litchfield, MN, USA
|
Posted 15 Nov 2006 7:10 am
|
|
Nate,
If I were you, I'd just get ahold of Bill Rudolph w/Williams. I'm sure he'd send you a new switch in a heartbeat. |
|
|
|
Nate LaPointe
From: Los Angeles, California, USA
|
Posted 16 Nov 2006 10:57 am
|
|
Good idea, Bill at Williams is sure a nice guy. I'll call him. Thanks fellas!
------------------
www.natelapointe.net
|
|
|
|