| Author |
Topic: Volume pedal pot adjustment? |
Robert Murphy
From:
West Virginia
|
Posted 16 Oct 2006 6:40 pm |
|
| I bought a used Goodrich and replaced the pot. o.k. With my ohmeter I found that in the full on position I still had more resistance than the pot at its' max rotation before install. I tested this with my amp also. So I undid the set screw and tweeked a little more volume out of the full on position. Now the pedal is loud but there is some amplification in the full off position. Very low level that I can live with. This is my first pedal so am I doing this correctly. Your opinion is welcome. |
|
|
 |
Dave Mudgett
From:
Central Pennsylvania and Gallatin, Tennessee
|
Posted 16 Oct 2006 7:00 pm
|
|
| That is what I do - sometimes there is a bit of a tradeoff. But I like my full-on to be full-on, and I can live with the slight bleed in the full-off position. I imagine there are those who prefer it the other way. |
|
|
|
Jack Stoner
From:
Kansas City, MO
|
Posted 17 Oct 2006 2:07 am
|
|
I always adjusted mine so it's off in the "off position". If you need more volume, just turn the amp up a little.
I now use a Hilton and I have it set the same way - "off is off". |
|
|
|
Jim Palenscar
From:
Oceanside, Calif, USA
|
Posted 17 Oct 2006 7:08 am
|
|
| It's all based on the design of the pot collar that the manufacturer designed for the string. If you were able to turn it down on a lathe, you might find that you had full range of the pot. However- you never want the pot to stop the pedal travel- it wouldn't last long that way- the stops need to be done by the pedal itself. So- all in all- it really is a trade off and, in my experience, not worth the trouble of making it perfect. |
|
|
|
Mike Harmon
From:
Overland, Missouri, USA
|
Posted 17 Oct 2006 8:48 am
|
|
There's another reason you don't want the pot to hit the stops -- it makes a nasty 'clunk'. I work on a lot of pedals for Scotty and I always check after replacing a pot to make sure that the pedal hits the rubber bumper just barely before it hits the end of rotation.
Mike |
|
|
|
richard burton
From:
Britain
|
|
|
|
Robert Murphy
From:
West Virginia
|
Posted 17 Oct 2006 4:47 pm
|
|
| Thanks for the input. First time I ever owned a volume pedal and I enjoyed noodling it out. |
|
|
|
