3 cord Vol Pedal Hookup

Brian Ainsworth · From: Fishkill New York

Hi Everyone... I know this an old subject. What is the right way to do this 3 cord hookup.. I have a Goodrich passive pedal. It has 1 jack for Inst. and 2 jacks for amp. I hooked a cord from the Inst.jack to the send jack on the amp and a cord going from the amp jack to the return jack on the amp. Is this the right or should they be reversed.. Both amps are Peaveys N-12 and a N1000. Thanks for the help.. You learn alot on this forum.Everyone is great..

------------------
Bryan Ainsworth

Mike Wheeler · From: Delaware, Ohio, USA

On the front of the N112 you have a Pre-EQ patch. I use that one.

From guitar output go directly to the N112's input jack (on the left). From the Pre-EQ patch OUT jack go into the pedal's input (where you'ld normally plug the guitar). Then out of the pedal's output (either one) into the Pre-EQ patch IN. That's it.

Brian Ainsworth · From: Fishkill New York

So Ive had it hooked up backwards all this time. Duh..... Probably sound better too.. Thanks for your help Mike.. I appreciate it

------------------
Bryan Ainsworth

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: