Curt Langston
|
Posted 8 Nov 2005 4:43 am |
|
George, the thing to remember is: if you come out of the "pre amp out"(or effects send) of the Steel King to the input of a mixer, you must come back out of the mixer into the "power amp in"(or effects return) on the Steel King. In other words, you must run it in a loop. Plus you have to have a way to run your CD into the mixer,ie: using one channel, OR you can use the auxillary input on the mixer. Either way, you have to make a loop, or circuit.
------------------
I'd rather be opinionated, than apathetic!
|
|
