| Author |
Topic: Webb effects loop problem |
Eddie Thomas
From:
Macon,Ga.,USA
|
Posted 6 Aug 2005 10:01 pm |
|
| My effects loop in my Webb has started to act up, it completely stops all sound coming from the speaker. When you unplug the cables going to the effect loop,the sound comes back. In a few moments,you can plug back into it, and it performs just like it should. And then, a few moments later, it will do the same thing again. Has anyone had a similar problem? Baffles me. Thanks, Eddie |
|
|
 |
Glenn Boppre
From:
Pengilly, MN, USA * R.I.P.
|
Posted 7 Aug 2005 4:39 am
|
|
Eddie, I had a similar problem with my Webb.
I called Webb and was told the problem was in
the jack as they were using imported jacks
from Mexico and were having some problems
with them. They sent me a different one
and I haven't had a problem since. I hope
this helps.
Glenn |
|
|
|
Eddie Thomas
From:
Macon,Ga.,USA
|
Posted 7 Aug 2005 7:06 am
|
|
| Thank you Glenn, I will check that out. |
|
|
|
