| Author |
Topic: ''Different settings for the Nashville 400 ''. |
Gary Preston
From:
Columbus, Ohio, USA
|
Posted 19 May 2005 4:44 pm |
|
| I know this is a rerun but i missed it . I saw these settings here before and wrote them down ,but somehow cant find them . I tried a search but couldn't find them . If you have a setting that you like please share it with me . Thanks so much ahead of time . Best regards,,,Gary . |
|
|
 |
KENNY KRUPNICK
From:
Columbus, Ohio
|
Posted 19 May 2005 9:51 pm
|
|
Bass + 15
Shift "9-0-Clock"
Mid "800"
High +6
Presence +3
 |
|
|
|
Ernie Renn
From:
Brainerd, Minnesota USA
|
Posted 19 May 2005 10:17 pm
|
|
Buddy's Nashville/Vegas settings:
BASS: 3 O'CLOCK
MID: 12 NOON
SHIFT: 12 NOON
TREBLE: 10 O' CLOCK
PRESENCE: 2 O'CLOCK
More Info-Type Stuff HERE!
------------------
My best,
Ernie
www.buddyemmons.com
|
|
|
|
Gary Preston
From:
Columbus, Ohio, USA
|
Posted 20 May 2005 12:36 pm
|
|
| I was hoping for a lot of help with this but i guess not . Maybe someone will help me this weekend . G.P. |
|
|
|
Ray Minich
From:
Bradford, Pa. Frozen Tundra
|
Posted 20 May 2005 1:53 pm
|
|
This issue is so subjective as to be the cause of insanity. I found that, after I put the mod into my NV400, the settings presented in the NV400 manual (the Factory original) were altogether inappropriate for me.
You gotta season it to taste and if it's tied down paint it. |
|
|
|
Billy Carr
From:
Seminary, Mississippi, USA (deceased)
|
Posted 20 May 2005 10:29 pm
|
|
| I played through the NV-400's for a long time and always liked the sound I got. My settings on the Nv-400's are close to what I use now on one of Nv-1000 amps. Shift > 800 Mid > about 7:00 Presence > about 2:00 Lows (Bass) > about in between 2 and 3:00 Highs > around 1:00 Reverb > if using delay > about 9:00 if no delay about 12 to 1:00. Of course I use the XR-16 pick ups on my guitars and that products a lot of highs so you may want to look at what kind of p/u's your guitar has on it. |
|
|
|
Dave Grafe
From:
Hudson River Valley NY
|
Posted 23 May 2005 8:54 pm
|
|
Pre - 2
Post - as needed
Low - 0
Mid - -15
Shift - 300
High - 0
Presence + 12.5
Reverb - as needed
|
|
|
|
KENNY KRUPNICK
From:
Columbus, Ohio
|
Posted 25 May 2005 7:56 am
|
|
| Gary, have you tried any of the posted settings? |
|
|
|
John Bechtel
From:
Nashville, Tennessee, R.I.P.
|
Posted 25 May 2005 6:26 pm
|
|
If you did, you're probably totally "cornfused"  by now! So, I guess it won't do any more harm to try these!
Pre~Gain 5, Low +6dB, Mid –7½dB, Shift 800Hz, High +3dB, Presence +3dB, Rev. 5, Master 10. Or, if you want to sound like Paul F. set the Low on ±0dB. (Just wishful~thinking!)
------------------
“Big John” Bechtel
’04 SD–10 Black Derby w/3 & 5 & Pad
’49-’50 Fender T–8 Custom
’65 Re-Issue Fender Twin–Reverb Custom™ 15” Eminence
web site |
|
|
|
Gary Preston
From:
Columbus, Ohio, USA
|
Posted 26 May 2005 5:39 pm
|
|
| Kenny yes i have tried some of the settings . Looking for more ! G.P. |
|
|
|
Larry Behm
From:
Mt Angel, Or 97362
|
Posted 27 May 2005 5:46 pm
|
|
Gary there is something in your chain that is causing you problems. If none of these setting turn you on let's address the other pieces of your setup.
Larry Behm
503-722-7562 |
|
|
|
Gary Preston
From:
Columbus, Ohio, USA
|
Posted 1 Jun 2005 1:09 pm
|
|
Hi, Larry . I have played a 1976 Fender Vibrosonic with the Factory Jbl. since 1976 and
i suppose i'm looking for a sweet sound like it is out of my Peavey amp and at this time i havn't found it . The Peavey sounds ok when i use my rack with it but i'm trying to get a Fender sound from it and i can't . I had a Reverb ''mod '' kit installed in it and it did sound somewhat better . Maybe i'm looking for more than i should . Thanks for everyones input
i do appreciate it . Gary . |
|
|
|
Dave Grafe
From:
Hudson River Valley NY
|
Posted 5 Jun 2005 5:55 pm
|
|
| Unfortunately the EQ knobs can't make your Peavey SS amp sound like a Fender tube rig no matter where you set them. |
|
|
|
