Pick up highth

Larry Strawn · From: Golden Valley, Arizona, R.I.P.

I thought I saw a post some time back on how high the pick up should be from pu to strings, can't find it. Can some one help, or refer me to this other post??
Thanks
Larry

[This message was edited by Larry Strawn on 16 April 2005 at 02:40 PM.]

David Higginbotham · From: Lake Charles, Louisiana, USA

1/8 to 3/16 is generally acceptable. If you have a covered pickup such as George-L the lesser the height. Open such as Lawrence the greater the height. As a general rule, I place 2 quarters between the strings and the top of the pickup adding a little more distance on the larger strings. Hope this helps.
Dave

------------------
BMI S-12 8&5, Webb 614-E, Fender Twin Custom 15

Larry Strawn · From: Golden Valley, Arizona, R.I.P.

Ok David,,

I'll try that, thanks for the reply.

Larry

------------------
Emmons S/D-10, 3/4, Sessions 400 Ltd. Home Grown E/F Rack
"ROCKIN COUNTRY"

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: