| Author |
Topic: Peavey Amp |
Bob Morgan
From:
Lehi Utah USA
|
Posted 26 Dec 2004 2:15 pm |
|
This question might be best to ask Mike Brown.
I am using two Peavey Nashville 400 amps and a Peavey Pro Fex II. When I turn them on I get a loud several loud pops and also when I turn them off I get a loud pop.
Is there anything I can do to stop this. Sometimes it is not so loud and others times it is VERY loud.
Thanks
Bob |
|
|
 |
John Daugherty
From:
Rolla, Missouri, USA
|
Posted 26 Dec 2004 3:47 pm
|
|
Turn the profex on first, then the amp. When turning off, turn the amp off first.
Or turn the gain control off on the amp before turning on or off.
|
|
|
|
Jan Mulder
From:
The Netherlands
|
Posted 30 Dec 2004 8:14 am
|
|
Hello,Bob
I have the same problem with my Nashville 400, and I think the problem is the powercap’s C 63 & C64 ( 4700uF 55volt ) and C66 & C67 ( 1000uF 35 volt) are bad, I did not have the time yet to replace them but as soon as I have the replacement caps I will let you know the results
|
|
|
|
Mike Brown
From:
Meridian, Mississippi USA
|
Posted 31 Dec 2004 8:20 am
|
|
| Contact our factory phone techicians at 1-877-732-8391, then select the "Repair Assistance" option. They will be glad to assist as much as possible by phone. |
|
|
|
