session 500rd line out?

Terry Sneed · From: Arkansas,

I'm using a sesion 500rd amp. To hook straight into the board on our PA, don't I
just plug into the "line-out" on the back
of my amp and go to the board? We tried that the other night at practice, and we couldn't get a sound. we just went ahead and miced my amp which sounded really good, but I just wanted to see what the difference in sound would be hooin up direct. Does that mean my "lineout" ain't workin, or do I have to have somethin like a direct box? I thought the "line-out" was on the amp to keep from having to use a direct box.
Terry

------------------
Zum D10 /8x5 / session 500rd
steelin for my Lord

Mike Brown · From: Meridian, Mississippi USA

The XLR output on the Session 500 is determined by the POST GAIN control. If the POST GAIN is turned down, there will be no output signal.

Terry Sneed · From: Arkansas,

Mike, I had the post gain set on about 4. Do i need to set it higher than that when hookin direct? thanks
Terry

------------------
Zum D10 /8x5 / session 500rd
steelin for my Lord

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: