| Author |
Topic: Goodrich passive pedal |
Wally Sanders
From:
Lubbock, Texas, USA
|
Posted 28 Sep 2004 11:23 am |
|
| I need some info. I have a Goodrich passive volume pedal that keeps blowing..2...bulbs. When I got it, it had 28 volt bulbs both in the spare position and in the functioning position. Is this the correct voltage bulb? If it is correct, then I would suppose that one of the two resistors is blown or of incorrect value. The colored bands on the resistors are not visible. What are the values for these resistors? Any help is gretly appreciated. |
|
|
 |
John Daugherty
From:
Rolla, Missouri, USA
|
Posted 29 Sep 2004 4:27 am
|
|
| Wally, I can't answer your questions but have a suggestion. Check the voltage output of the power supply. The supply may be defective and supplying a voltage which is to high. That could account for the bulbs burning out. Good luck...........JD |
|
|
|
Wally Sanders
From:
Lubbock, Texas, USA
|
Posted 30 Sep 2004 12:34 pm
|
|
| Thanks, John. That is what I am thinking, also. I supose I need a scematic showing the values of those resistors. |
|
|
|
