| Author |
Topic: Session 500 mod question |
Mark Metdker
From:
North Central Texas, USA
|
Posted 21 Jul 2004 5:39 am |
|
Is there a mod for the session 500? IF so, what is it, and what does it do?
Thanks for helping a dummy out!
------------------
BMI S-10
Peavey Session 500
Do Right, and Fear No Man
Ronald Reagan |
|
|
 |
Erv Niehaus
From:
Litchfield, MN, USA
|
Posted 21 Jul 2004 5:53 am
|
|
Yes, there is a mod for the Session 500. I've got one but haven't put it in yet. I'm sure it makes the same changes to the 500 at to the Nashville 400's. I'm sure you will hear from Mike with the part number and etc. I think the cost was around $30 from my local Peavey dealer.
Erv |
|
|
|
Mark Metdker
From:
North Central Texas, USA
|
Posted 21 Jul 2004 6:16 am
|
|
Thanks Erv. What changes does it make? Tone differences?
------------------
BMI S-10
Peavey Session 500
Do Right, and Fear No Man
Ronald Reagan |
|
|
|
Bill cole
From:
Cheektowaga, New York, USA
|
Posted 21 Jul 2004 9:11 am
|
|
| the tone is like day and night sweet Lemay also makes one which I have in my 500 [This message was edited by Bill cole on 21 July 2004 at 10:12 AM.] |
|
|
|
Paul King
From:
Gainesville, Texas, USA
|
Posted 21 Jul 2004 9:29 am
|
|
| Mark, I just ordered 2 mod kits for the Nashville 400 amps, one for me and one for my brother. I called Mike Brown at Peavey and the kits were $30 each. It is my understanding they make a big difference in these amps. Dennis is going to install them in our amps since he has years of experience in reading schematics and sordering. If you have a problem call me or come over, since we only live 20 minutes apart. |
|
|
|
Mark Metdker
From:
North Central Texas, USA
|
Posted 21 Jul 2004 9:32 am
|
|
| Muchas Gracias boys. I guess I need to call Mr. Brown. |
|
|
|
Erv Niehaus
From:
Litchfield, MN, USA
|
Posted 21 Jul 2004 9:35 am
|
|
I even have the mod kit for my ProFex II. I haven't got that one in yet either!  |
|
|
|
Mike Brown
From:
Meridian, Mississippi USA
|
Posted 21 Jul 2004 10:19 am
|
|
For those who are not aware, Peavey offers tone mod kits for the Nashville 400(after serial number 08575482) Vegas 400, Session 400, Session 500 and the Profex II multieffects processor.
You may order these through your local authorized Peavey dealer or from our parts department at parts@peavey.com Or, you may call us toll free in North America at 1-877-732-8391.
The kits are listed at www.peavey.com
Mike Brown
Peavey Electronics Corporation |
|
|
|
Doug Ferguson
From:
Burnet, Texas, USA
|
Posted 23 Jul 2004 11:32 am
|
|
| My Session 500 is on the way back from Peavey right now after having the mod done and a general back to factory spec job. (someone had done some soldering on it before I got it years ago) I can't wait! I'll let you know how it sounds next week. |
|
|
|
Mark Metdker
From:
North Central Texas, USA
|
Posted 23 Jul 2004 11:59 am
|
|
| Great, thank you sir. |
|
|
|
