| Author |
Topic: Standel help? |
Jerry Roller
From:
Van Buren, Arkansas USA
|
Posted 17 Apr 2004 10:07 pm |
|
My Standel Custom solid state lost most of its power in the non-reverb channel tonight. Can someone advise me what is likely to be the problem. I need help.
Thanks,
Jerry |
|
|
 |
John Floyd
From:
R.I.P.
|
Posted 18 Apr 2004 3:46 am
|
|
| Does it have the potted/ encapsulated modules inside, if so, probably very little that can be done unless you salvage one from another amp. |
|
|
|
Brad Sarno
From:
St. Louis, MO USA
|
Posted 18 Apr 2004 6:53 am
|
|
I thought you could still get those modules from Standel. Also, there are schematics out there that show what's in the colored modules, so they may be easy to create from scratch.
Brad Sarno
|
|
|
|
Jon Light (deceased)
From:
Saugerties, NY
|
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 18 Apr 2004 8:26 am
|
|
| It seems like I had heard Woody Woodel was a guru on these amps and was possibly going to make the modules (got that several years ago from the new Standel owner). Jerry, you might check with Woody, I believe he is the right guy for this amp! [This message was edited by Ken Fox on 18 April 2004 at 09:27 AM.] |
|
|
|
Brad Sarno
From:
St. Louis, MO USA
|
Posted 18 Apr 2004 12:57 pm
|
|
There are schematics available that show what's in the modules. I think they're pretty simple. Check at Standel's site for the schematics. I think they're posted.
Brad Sarno
|
|
|
|
Jerry Roller
From:
Van Buren, Arkansas USA
|
Posted 23 Apr 2004 10:05 am
|
|
The Standel is on its way to Woody Woodel to be repaired. Thanks to all for the advise.
Please close this thread, thanks, Jerry |
|
|
|
