| Author |
Topic: JBL K-120 for steel? |
Dag Wolf
From:
Bergen, Norway
|
Posted 8 Dec 2003 11:23 pm |
|
How are the K-120 compared to a D-120? Will the K-120 sound good for steel?
Thanks,
Dag |
|
|
 |
Brad Sarno
From:
St. Louis, MO USA
|
Posted 9 Dec 2003 6:24 am
|
|
The K-120 is based on the same frame/magnet as the D-120 only it's black. It's still that same sweet sounding alnico magnet like the D-120. As I remember, the voice coil was made stronger somehow so it could handle the heat better making it a higher power rated speaker. My understanding is that they are nearly identical in tone. Should be great for steel.
Brad Sarno
|
|
|
|
Dag Wolf
From:
Bergen, Norway
|
Posted 9 Dec 2003 7:18 am
|
|
Thank you Brad.
Dag |
|
|
|
Harley Morris
From:
Riverside, California, USA * R.I.P.
|
Posted 23 Dec 2003 7:26 pm
|
|
| Dag: I have a K~120 in a Carvin X-60 amp that I use alot for fiddle, but it's too "light" to use for pedal steel, unless, of course, you are playing a super small room, or just around the pad... I do have a coupe of other amps with 15" JBLs in them to blow steel through tho.. Regards, Harley |
|
|
|
Ricky Davis
From:
Bertram, Texas USA
|
Posted 23 Dec 2003 10:22 pm
|
|
Brad is totally correct in his post.
Junior Brown uses K-120's in all his Twins and plays and records steel guitar all the time and it handles just fine.
If you use two K-120's in a two speaker amp....No problem at all....If you use a 1-12 amp >No it won't handle steel very well at a big gig....because any amp that only has 1-12 in it....is most likely under wattage anyway.
I prefer the K's over the D's simply because they'll handle a little more than the D and sound the same.
I have a K-130 in my twin now....and a D-130 in an extension cabinet.....and it's the most wonderful sound I can ever hope for.
Ricky |
|
|
|
