| Author |
Topic: Evans Amps |
Dan Sliter
From:
Dardanelle,Arkansas
|
Posted 21 Dec 2003 4:29 pm |
|
I bought a evans amp last week.This week end i thought i would take it to the gig and try it out.I have been using a rack system consisting of a mosvalve 1500,proflexII,Blues tube,and 2 15" BW 1501-4. I started out with the evnas amp and never played through the rack system the rest of the weekend.It is a fantastic amp.And i learned something while using it about reverb.You can use to much!!! This is the setting i used on the evans amp.
Both volume were on 5 the reverb was on 4 the bass was on 5 the body at 6.5 and the treble was at 2 the boost and expand was off. i know the treble seems low but it sound super fantastic.This amp is a keep for me.Oh this is the older amp the one in the large cab.i think it is a 85 model.because the ser # is #8527.Anyone have any suggestions on other setting i would like to know. |
|
|
 |
b0b
From:
Cloverdale, CA, USA
|
Posted 21 Dec 2003 5:44 pm
|
|
| Moved to 'Electronics' section. |
|
|
|
John Lazarus
From:
Tucson, AZ.
|
Posted 22 Dec 2003 10:12 am
|
|
Dan, They are great amps. I have two; a 1982 and a 1985. The older one made in Texarkana sounds slightly better than the newer one.
I use the following setting:
Plug into input #2
Master 3
Reverb 4-5
Depth up
Expand up
Bass 7-8
Body 7-8
Treble 2
Volume 2
Let me know what you think. |
|
|
|
George Kimery
From:
Limestone, TN, USA
|
Posted 22 Dec 2003 5:58 pm
|
|
I have # 8258 Large cabinet built in Shreveport. My current settings with my 74 Emmons PP are:
Master Gain 2
Reverb OFF (It was picking up a radio station, so I am just using an RV 3 for reverb right now)
Depth: ON
Expand: OFF
Bass: 7
Body: 8
Treble: 3
Volume: 6
|
|
|
|
