Peavey Special 212, Lights Up but No Sound

Terry McBurney · From: Houston, TX

Before I take the amp to a repair shop, does this sound like a major problem?

I can plug my Goodrich pedal into another amp and all is okay.

Mike Brown · From: Meridian, Mississippi USA

Terry, using a shielded guitar cable, try patching from the PREAMP OUT JACK to the POWER AMP IN jack on the rear panel. If the signal returns after completing this patch, the problem is that the POWER AMP IN jack is not switching properly. Otherwise, I advise that you allow a tech to benchcheck your amp.

If you need further assistance, you may contact me at 1-877-732-8391.

Thanks,
Mike Brown
Peavey Electronics Corporation

Terry McBurney · From: Houston, TX

Thanks Mike.

I was hoping to get input from you.

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: