Settings for a Transtube Fex?

Bob Kononiuk · From: Springfield, Missouri, USA

I just won a Transtube Fex off ebay. I have never used one (nor a profex or anything similiar) I have heard of Peterson presets and of Newman presets.

Where can I get a hold of these. Is one better than the other?

Also, does either one have a setting for a dobro sound?

Thanks.

------------------
Bob Kononiuk
______________
Carter SD-10
Nashville 112
Hilton Volume Pedal

jim milewski · From: stowe, vermont

if you can find Jack Stoners web page you'll be all set, someone should know here, these things are a breeze to program

Ken Fox · From: Nashville GA USA

You can load these from a RAM card, if you can borrow one! See my post under your power cord post for other options.

[This message was edited by Ken Fox on 21 September 2003 at 07:30 AM.]

Mike Brown · From: Meridian, Mississippi USA

Bob, I've got about 50 programs that were created by Steve Byam(Trace Adkins ex-steeler) and the late Gary Hogue. Just send me a RAM cartridge with a copy of this post and I'll be glad to load them for you. The address is;
Peavey Service Center
Attn; Mike Brown
412 Hwy. 80 East
Meridian, MS 39301

You may call me toll free at 1-877-732-8391 from 8am-5pm CST Monday through Friday.

Mike Brown
Peavey Electronics Corporation

Dennis Wood · From: Savannah, TN USA

Jack Stoner website. has some pretty good patches.
http://web.tampabay.rr.com/jstoner1/ttfex.htm

------------------
Sierra U-12 Crown Gearless, Peavey Nashville 400,
1971 Fender Twin Reverb,
Peavey Tubefex,
Peavey Stereo 212,
Peavey TT Bandit w/ex speaker. Regal Reso, Tele, Strat, 1970 Les Paul Std.

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: